2. speakers
  3. 192183-20253

Large speakers plus EQ, what have you done?

Hi Everyone,

I’m hoping to collect experiences from those who have:

1. Large (floor standers) with genuinely deep bass

2. Have EQ’d the speakers, at least through the bass section.

There are many ways to get excellent bass, but please keep OTHER methods off this discussion.  If you use a subwoofer, or bass array, or whatever, this discussion is not about that. I know I’ve recommended some of those ideas myself. I just genuinely want to know who has tried this particular combination and what their experience has been.

This is also not a discussion about what I’m going to buy. Just curious who has done this and how far they feel it got them in terms of integrating the speakers with the room.

Were you satisfied?  Did you end up giving up and doing something else?

 

Thanks!

 

Erik

erik_squires
sbrownnw
694 posts
 

Have Audio Refinement (YBA) separates and speakers:

  • AR Pre 5 analog preamp running in stereo mode only
  • AR Multi 5 amp using front 2 channels only (stereo mode)
  • ProAc Studio 148, grills off, on Soundocity SEV9 outriggers

Speakers can get a little bass heavy (they easily go down to 25Hz) plus have an upward treble tilt in my room. Added a Schitt Loki Mini+ 4 band equalizer between the preamp and amp. It had the ranges I desired for modification, is very quiet (and runs a little warm), got it used in excellent condition for a great price and is black like the rest of my system.

Overall, I am very happy with the new addition and results. I would recommend getting one.

jimijam
56 posts
 

My AR 9 speakers and Technics SH-8020  eq works for me

mattw73
63 posts
 

Not too long ago in my living room I had a pair of Polk R700's for streaming & stereo TV. I have a decent null at 50hz & a huge boost/peek at 42.

Initially I was using an Arcam SA30 with its Dirac & SVS subs & their PEQ App. The Arcam crapped out on me & then I tried a MiniDsp DDRC-22D. The minidsp is basically a 2 channel dirac box. Multiple digital inputs & digital outputs only..so you can use your favorite dac. I upgraded the power supply & ditched the subs. I had a hard time incorporating the subs & mains with the 2ch dirac minidsp. 

The Minidsp/Dirac worked well for bass. Eventually though I didn't like what it was doing to the mid & high frequency. I wasn't well versed in Dirac & apparently I shouldn't have been trying to correct anything over 2 to 300hz. But I had a peak around 1khz I was trying to tame as well. This was my living room...no acoustic treatment. The DSP device worked well with the bass though. Lots of time measuring & remeasuring. 

After I grew tired with the Minidsp I hooked a RME ADI-2 Dac to the TV/Streamer. I used a Super Farad 3 power supply I had with the dac & hooked the Dac straight to amp (class D Hypex Nilai). I love that little Dac. Great volume control & cool loudness function that adjust with volume. Best thing though is that it has 5 PEQ tabs..and 2 extra but  limited PEQ tabs you can set up for a Bass & Treble tone control. You can also set the PEQ for each channel individually. 

With a Umik & REW software I could measure the room & see my issues. The Dac had just enough PEQ tabs to dial in my bass & any issue in the higher frequency. Plus it sounded more natural than using Dirac to my ears...at least in the upper frequencies. I'm back to bookshelves now in that room but was very happy with how a little PEQ helped my overall bass response. Obvious issues is that it only worked for digital sources. It's also a dac that not everyone will appreciate as much as I did. 

More to discover