Recommended amplification

I don't know but they are always high.

Some people think, even people posting in this thread, that more power means "better" sound.  But if at normal listening volume you're listening to 1 watt, then you have to hope the 300W applifier you have has a good first watt and they didn't blow the budget on the high power.

Jerry

Source Material plays a big part as well… So much stuff we remember sounding great from our teen years just doesn’t cut it on the reveling systems we’ve acquired over the years in our pursuits of sonic bliss, maybe it was the drugs… who knows, LOL…. Heck, even a lot of today’s so called “Remastered” material sounds worse that then originals, many times it’s just S#!t on a Gold Plate, if ya know what I mean. Try some really well recorded material and if it sounds great, kinda narrows down the field as to what the issue could be. Been there so I get it.   

some speakers thrive off the headroom high power amps provide.

Interesting topic and one I’ve wondered about. I have the meters on my Accuphase amp set to freeze at the highest wattage during a listening session. Even listening to Mahler Symphonies at 70 db I never exceed more than 1 Watt. My speakers are Harbeth C7ES-XD at 87db efficiency and 6 Ohms and my amp is rated at 150 Watts at 8 Ohms. So I have plenty of reserve power.  I guess I could gave been fine with an amp at half the power. 

Remember, it is not only the raw power output specification that matters.  Impedance matching of components in the amplification chain (preamp, phono preamp, and power amp) and slew rate are critical.  Assuring the amp can handle the low impedance spec of the speakers is also critical.  Impedance matching affects sound quality by permitting optimal power transfer which results in less distortion, a clearer sound, more impactful bass, and improved staging over a mismatched system. Slew rate, or how quickly an amplifier reacts electronically to rapid changes in input signal impacts distortion and dynamics in compositions with fast changing and dynamic passages/phrases. Finally, amplifier quality has an effect.  My most recent experience in moving from a respected but vintage 300 WPC amp to a 105 WPC modern high quality integrated was significant improvements in all areas of SQ and no losses, including dynamics, staging, and image density.  It just so happens the more modern integrated has a higher slew as will as modern design and better build.  Two caveats:  

1:  specification are for designers: use you ears. 
2:  in general, I agree in the most part with all who stated greater power provides more musical authority … most of the time … but other factors enter into the game as is my experience with my recent change .