A good wire brush with acetone. The record won't sound very good if it plays at all, but it will be clean.
"Cleaning" Vinyl Makes It Worse Not Better!
I"m using a spray 'advanced vinyl record cleaning solution' with a cleaning cloth.
It creates GUNK in the grooves which can be fixed by cleaning the needle 5-7 times during playing one side.. It gets into the grooves and fixes the problem. I'd rather find a better way to clean the discs. Sounds dumb, I know.
What am I doing wrong?
Please Help!!
- ...
- 89 posts total
@antinn Heliios [sic]? Have you moved on from the Sussurro Gold? |
Your prior statement is obviously very critical of items that I may have never said in the past. Unfortunately, the VPI Forum is long gone and all we have left is the published book.
As far as my chemicals did not work - the list of chemicals that are now in the book are quite extensive:
There are a host of chemicals that I address and many different processes. Ultrasonic cleaning is addressed ad-nauseum in Chapter XIV detailing the effects of kHz, power, how many records at a time, spinner speed, etc,. But depending on where you live, what equipment you have, and your own goals, the book is a handbook that can guide in any direction you want to go. Essentially, I have no fixed system. My first recommendation is the basic standard chemicals Liquinox, Citranox and Tergitol 15-S-9. If they work great, if not, and if I work with you, the hours I addressed above are my time - not yours, and I will adjust as necessary to hopefully match a chemistry and process that works for you. And as the book says in the Forward, All methods/procedures specified here present opportunity for experimenting with different cleaning agents, different cleaning brushes, different drying cloths, and different cleaning equipment....If you proceed down the path of experimentation, the information provided by this book can guide you to informed decisions... Otherwise, like your selection of cartridge, I have four Soundsmith cartridges that I rotate among a two-arm table, Sussurro Gold Limited Edition, Paua, Boheme, and Carmen. Always have one back at Soundsmith for rebuild. Take care,
|
FWIW, this is what is in Dawn Ultra - CPID. Aside from water there are 19-ingredients. The first 3 (anionic surfactants) are what does most of the cleaning. But understand that the thickness is artificial - they add propylene glycol (anti-freeze) and salt. It's a good cleaner, but it's a bear to rinse completely. My basic recommendation for an equivalent without all the junk in the trunk (no thickeners, no fragrances, no coloring agents) and rinses much easier is Alconox Liquinox Liquinox_tech_bull.pdf which is about 50% concentrated with a combination of anionic and nonionic surfactants and is relatively cheap - Amazon.com: Alconox - 1232-1 1232 Liquinox Anionic Critical Cleaning Liquid Detergent, 1 quart Bottle : Industrial & Scientific. |
No. VPI did a comparison some year back at CAF with two exact same tables (HW-40); played back through some big Wilsons; one with the Lyra-Etna, the other with the Soundsmith Hyperion (the low output version of the Helios). They were playing a Louis Armstrong record. The differences in the cartridges were to me very apparent. The Etna made Louis sound like he was singing in Aspen, CO (clear & bright - call it a bit yang), while the Hyperion made Louis sound like he was playing in New Orleans (hot and humid - call it a bit yin); but neither missed any details. Personal taste would dictate which one you would like. To me, the Sussurro Gold is in-between, and much more to my liking (and my equipment). |
- 89 posts total