Footers?


I have an EMM Lab CDSA-SE with what are said to be some pretty fancy and engineered footers. Would be after-market footers be any improvement? If so, in what way. The equipment sits on a heavy, solid maple stand, and is isolated from the floor to boot. Thoughts?
pubul57
I have found Symposium products work great under a cdp. I ahve a set of double stacked set of roller blocks - series 2 and presently a svelte shelf which will be upgraded to an ultra shelf.

Although these products are not cheap, they work!!And yes, it did make a differnce from going from a single set of series 2 rollerblocks to the double stacked set.www.symposiumusa.com

I also have the eden sound (www.vermontaudio.com)brass plates on everything as well, cdp, amp, pre , conditioner. I had mine made double the thickness as the standard plate. Hope this helps.
Cheers
I'm going to try two of the Edensound discs and two of the Herbies's discs. I have two Walker Audio discs for my preamp and Merlin BAM. Thanks for all the input:)
After using or trying many through the years including
symposium, stillpoints, grand prix apex, black diamond, harmonix, & of course a few others. I found all to be good & some better than others.

I would highly recommend checking out the WAVE KINETICS A10-U8 Component Control System & also the WAVE KINETICS 2NS Loudspeaker Interface System. I am experiencing some very good results with better image, soundstage expansion, & Bass was also improved,,, more definition especially in the mid bass frequencies.

They do a great job with both Airborne & Mechanical vibration. The prices are not out of this world compared to a few others

Cheers
Any experience with the effectiveness of the Ginko 10 or 11s as platforms, or similar type of devices. The Ginko seems to be relatively inexpensive. The other similarly priced approach is the BrightStar AirMass/BigRock/Little Rock system.
Any experience with the effectiveness of the Ginko 10 or 11s as platforms?

I use a Gingko Cloud 10 in my system. When it is mass loaded to Gingko's specifications, it is very effective at reducing vibration. I use Mapleshade Heavyhats to mass load.

I also use Bright Star Big Rocks, maple platforms (up to 4" thick), and BDR cones/pits/jumbo pits. Of these, the Gingko platform and the BDR jumbo pits are the most effective at reducing vibration. Both produced audible improvements in my system. With the others devices, it was hard for me to say whether they made an audible difference. Of course, YMMV.