Which speakers are ideal to pair with a Yamaha as3200

@kofibaffour  i have the phono goldnote ph-10 all balanced

Yeah then you plug the Phono stage into the balanced input of the Flex Balanced and you're good on that front too @ercubano801 

So the DMP-A6 into the Flex balanced by USB cable as stated in my comment before yours and then from the goldnote, you use XLR/TRS cables to link the phono stage to the Flex Balanced and then you output from the flex Balanced with TRS/XLR cables into the AS3200

@kofibaffour can you suggest me good TRS to XLR cables for input and output connection?

@ercubano801, yes, I can.

Two of this links the Goldnote XLR outs to the TRS input on the Flex balanced

Two of this links the TRS outputs from the Flex balanced to the power amp

Dear @kofibaffour 

I wanted to update you on the situation. I purchased the balanced minidsp flex with the cables you suggested. Everything is ok except for the turntable connection that via the minidsp is very bad, it crackles even at low volume values ​​while if I use the streamer if I set the minidsp volume to maximum and use the amplifier to manage the volume it also crackles while if I keep it around -20 db it goes better and does not distort ... the thing that worries me most however is the turntable, truly terrible ... is it possible that it is a question of cables? or incompatibility with the prephono (Goldnote PH-10 connected to a technics 1200 gr2 with MC audio technica cartridge) ... I await your kind feedback, thanks

Technics-->RCA-->Goldnote-->XLR output to TRS input -->MiniDsp-->TRS output 1-2 to XLR input of Yamaha s3200