NAD C541 Tray Won't Open

I believe the C541 player has not been manufactured for a number of years now. So I don't think it would still be in warranty. I agree that it would be safest to remove the top cover and carefully extract the disc. Then you can inspect to see if there are any obvious causes for the jammed drawer. You should be able to navigate through the NAD website for your closest repair/service dealer or call them at their U.S. main office.

Hi, former NAD Service Center,

If your belt has broken, here are the NAD Part Numbers (they had at one time a very high $20 min shipping fee on top of the part price, I guess since they are in Canada).

C541: #4102-6111-0 "Square Belt"

C541i: #4102-9026-0 "Rubber Belt"

I included both in case you had meant a C541i.

Contact Lenbrook/NAD Parts Department

Steve George
Nashville

I've heard similar issues with this unit, something common with nad players from what i know.

I just fixed one of these.
Made in China in 2000. Rubber belt dried up.
Went to Ace hardware and got o-ring #29 in plumber's section
My NAD works like new again.

The only problem is taking it apart.
4 black screws in the bottom come off.

Remember: do not force anything!!!
Tilt the back of the transport upwards and slide off the front of the tray - it goes upwards. Then you will be able to lift off the whole transport assembly. Toothed wheel in front will let you move the tray and open it all the way. Press the two little tabs outside and remove the whole tray. Now you see the belt! Replace it with the o-ring and you are good to go.