Lossless Files Vs CD's

"It still seems to me that Bit-perfect ripping does provide the best case scenario for reliably getting the data off the optical disk as best as possible"

You would be correct, however as stated before here, errors and error correction is not the thing that makes CD playback an inferior method. Its the CD servo and its effect on jitter from the transport. If you have a transport that is CDROM-based and buffers the data at high-speed in memory, then this can be as good as a ripped file, assuming a good hardware design.

"THere is still lots that can go wrong downstream from there in regards to jitter in particular even with a practically bit perfect ripped .wav file. More so in general perhaps in the case of FLAC which is lossless but compressed and requires more processing in the D2A conversion process."

My theory is that its not jitter differences that makes FLAC sound different that .wav. Particularly with the advent of Async USB.

Its the real-time behavior of the FLAC CODEC when running on the computer. Seems to happen on both PC and Mac.

On the other hand, FLAC CODECs in end-point networked devices, such as Squeezebox have been demonstrated to sound identical to .wav.

Only people using a computer for FLAC decoding hear these differences.

Steve N.
Empirical Audio

>2.5mm scratches along the disk are very likely causing interpolation of data. Scratches longer than 8.5mm (12000 bits) would result in clicks. I'm not sure how audible is the difference between brand new CD and server, but data stored on the server's hard disk doesn't deteriorate and has no timing.

Server driving DAC directly might be subject to timing variation caused by computer and playback program but when data is delivered in packets without timing (Wireless, Ethernet etc) the only thing that counts is quality of the clock used by remote device (assuming bit perfect transmission like with my Airport Express). When this clock is jittery it might require stand alone reclocker or jitter suppressing DAC.

Another thing I like about server is ease of use. I can find CDs much faster but also search whole database by artist, composer etc. I also created playlist for different uses like "Party Music" or "Dance Music". Backups protect not only in case of hardware failure but also fire theft etc. (wise to keep backup in remote location)

Steve,

Makes sense.

Logitech Media Server and Squeezebox Touch convert .wav files to and from FLAC for higher bandwidth transmission over the network as I recall. It seems to do a good job based on results as best I can tell. Not sure exactly what codec LT media server uses for FLAC or how it might be better or different than others.

I had Roku SOundbridge prior. No conversion was done there. Both Roku and SB sound quality is quite good. Roku definitely had more bandwidth issues resulting in frequent rebuffering. SB TOuch has virtually none. I attribute the SB superiority in this regard to some combo of better/more recent hardware, more efficient code and perhaps more efficient use of network bandwidth.

07-11-12: Kijanki
>2.5mm scratches along the disk are very likely causing interpolation of data.

I believe that is generally true only if the scratch exceeds that length in the direction that is followed by the spiral track. A narrow scratch in a radial direction, for example, could extend across the entire diameter of the disk without causing data errors, unless it is deep enough to allow air to enter and cause deterioration of areas that are adjacent to the scratch.

Best regards,
-- Al

Audioengr will Amarra 2.4 or Pure Music 1.82 convert flac to wav. and do they work with apple. In other wards do you have to set I tunes off. Which one do you like better as to amarra or pure music?