Do You Use USB for Streaming?


If so, you might be interested in the cable below

Power supply and USB cable separate audio signal cable

I use an Enercell USB Power Adapter as the power source

ENERCELL AC to USB Power Adapter 5VDC 1000mA 2730414

As it happens, using power from the USB port to supply the DAC's internal USB circuits is common practice.

The dual cable prevents RFI/EMI between signal and power conductors, as in conventional USB cables.

The quality of the cable itself is also very good and performed better than a very good "boutique brand" with both USB-A plugs plugged into my iMac

The biggest improvements I found were in clarity, image and dynamics.

I have compared the sound using the Enercell power supply to using a USB battery pack and could hear no difference, which means the power adapter is very quiet.

Season's Greetings :-)
williewonka
I have a Metrum Hex dac. For USB it uses a M2Tech interface. They power the interface internally in the dac and do not draw any power from the computer. They say this really improves the sound of the interface. So your device will probably be a good thing
Alan
Excellent post Williewonka, I can see where this could help.

Like Arh, my Allnic D5000 DAC does not depend on the USB to power but you are on to something by locating this.
Thanks guys - I have the Schiit Bifrost - an excellent DAC for the price. I assumed they used the USB power for cost savings, since it's a very basic little DAC

Then a couple of months ago Schiit came out with a "Decrapifier" - yes that's its name. It provides a better power option for USB interfaces. I had to wonder if that was planned?

Even though it's only $100 - you need a second USB cable for that solution

This cable however minimizes cable requirements and electronics - something I like to do.

The performance of the power adapter surprised me though - something that affordable that actually works well.

I tried a few adapters and the Enercell worked the best

My DAC has never sounded so good :-)

Regards
Thanks Williewonka, I use a Audiophilleo2 with PurePower. I am thinking that the PurePower approach is analogous to what is described above excepting that the USB conversion is external to the DAC. Possibly I am missing something.