Jyprez, yours is a good starting point. Try very slightly lowering the arm in the back and take a listen. Continue lowering very slightly until it gets worse rather than better. If your sound is disproportionately coming from one channel, you may need to adjust the azmuth or left/rightness of the cartridge looking straight on to the arm over the cartridge. This too can be adjusted by ear, but the best method is to reverse on channel and playing a mono record, listening for the lowest sound level as one side will be out-of-p'hase with the other.
Is extremely accurate "VTA" adjustment necessary?
Here's a very interesting article by Geoff Husband of TNT on the importance (or better relative unimportance) of overly accurate VTA adjustment.
Exposing the VTA myth?
A short quote form the article:
Quote - "VTA, or Vertical Tracking Angle is one of those topics that divides opinion...That 'VTA' matters is indisputable, but the purpose of this article is to examine the validity of the claims made for the relative importance of VTA...SRA/VTA matters of course, but in the real world not THAT much, rigidity, simplicity and lateral alignment are all more important"
What are your thought and comments on this issue?
Exposing the VTA myth?
A short quote form the article:
Quote - "VTA, or Vertical Tracking Angle is one of those topics that divides opinion...That 'VTA' matters is indisputable, but the purpose of this article is to examine the validity of the claims made for the relative importance of VTA...SRA/VTA matters of course, but in the real world not THAT much, rigidity, simplicity and lateral alignment are all more important"
What are your thought and comments on this issue?
- ...
- 126 posts total
- 126 posts total