Time for a "massive" turntable: Spacedeck vs Scheu


I have been considering upgrading my analog setup for a while (Michell Tecnodec and Thorens TD150 MKII). I will keep the Thorens as a nice example of a classic suspended deck. After many "light" turntables, I now would love to give mass-loaded table a try:

- Nottingham Spacedeck with Ace-Space arm

- Scheu Premier MKII with Moerch UP4 tonearm

I have listened to the Spacedeck a couple of times and love its solid sonic foundation, black backgrounds, solid bass, and warm but extremely detailed and tuneful sound. I have not had a chance to listen to the Scheu but would love to hear some comments and about direct comparisons with the Nottingham.

List of previous analog setups

Remaining system:
Denon DL103R (as the initial cartridge)
Wright WPP200C phono (planned)
Fi Y, Super X, First Watt F1
Cain & Cain Abby

Any comments, experiences, recommendations?

Rene
restock
For mass and quality have you condsidered the SOTA tables such as the Nova vacuum? The Origin Live Encounter arm or especially the Incognito work quite nicely on this table if you appreciate more natural sound. Match it with either a Shelter 901 or 90x cart and you will get "heavy".
In the end my choice of a Space was probably as much about the arm as the motor - the Spacearm is actually one of the better arms around, with a unique way of working - the carbon fiber and unipivot, plus many small fine tuning choices. This and the overall thoughtout-ness, and set and forget aesthetic. Scheu's are similar in this regard, though have a different thoughtout-ness quality. Teres to me was for people in the gimble tonearm camp, and the tinkerers, or DIYers. I would rather listen to music. I do think Origin makes a strong table, but I prefer the quiet genius of the Space and it's low-torque motor, etc.
Just to set the record straight...the Teres table is about as "tweaky" as a Rega P2. Probably even less with the VTA adjuster. Heck, you don't even have to use the power switch on the motor if you don't want to, just spin the platter to start and slow it by hand to stop. And if you want to play a 45 just hold down the power switch for 2 seconds and you have 45rpm. Oh yeah, no need for a strobe to check speed, it has one built in! And, and, and, the 1/2" recording tape belt might last 25 years.

Personal preferences aside, there are no good technical reasons to dismiss a table like the Teres. Especially if your personal preference leans towards unipivots....which, by the way, Teres recommends highly in many forms (Moerch, Graham, Schroeder).

The most valuable discussions are based on facts.
Wow, quite a lot of new answers while I was not looking....

I am pretty sure all suggestions are excellent. There seems to be in general a good consensus that all the mentioned tables, Teres, Nottingham, Scheu are all excellent examples of well executed turntables. From reading the archives for the last two years, the Spacedeck, Scheu Premier, Teres 255 seem to be all in about the same league so that at this point I think it all comes down to personal preference. Neither ones is really a "tweaky" table (at least compared to e.g. a Linn LP12).

Now here is one for discussion: The only thing I am still not sure about are the Acryl platters on the Scheu and Teres - any comments? I just seem to not like Acryl as turntable material very much so far...Anyone remember the acrylic Teres vs the wooden Teres comments?

The problem is that it is impossible to compare all the above tables in my system - any Teres or Scheu owners in the Toronto, Calgary, Bufallo area etc.?

Also, just a sidenote: Nottingham is coming out with a revised "hotrodded" version of the Spacedeck with improved motor housing, the Hyperspace bearing, and heavier armpod. Also, the Spacearm will feature additional damping and other small changes starting in May/June.

Thanks again for all the responses so far.

Rene
The SOTA Cosmos V, OL Illustrious arm and Shelter 901 (I have this trio) make an outstanding combination. Also, SOTA give outstanding service. I agree with Sit.