2. analog
  3. 1148743762

Air Line Arm Owners- Compressor Electrical Noise

As mentioned in another thread, I finally got the Air Line arm installed on the XL table, on the finite stand, etc. I installed the arm compressor in a separate 'room' (in reality a large walk in closet off the listening room) and powered the compressor from a 'regular' circuit outlet- the system is otherwise hooked up to its own dedicated lines, per standards discussed many times here.
I have been experiencing a periodic electrical 'zap' (sounds like a big ol' scratch on the record) through the system when the gain is up. Since the room lights dimmed when the compressor kicked on, I figured- why fool with the standard circuit to feed the compressor? I had the electrician come back and set up a separate line just for the compressor- having nothing to do with the system wiring or subpanel. (He had already pulled extra wire through the conduit up into the room, so it was no big deal to do this- he installed a high quality receptacle to this extra line, and terminated it at a different subpanel than that which runs the audio system).

Anyway, still that nasty zap. Never out of options, I decided to plug the compressor into a 240v-120v stepdown transformer I use to power the HT system in the same room. (The HT system is completely separate from the analog hi-fi system we are concerned with here).
So far, so good- the compressor kicks on, but no zap.

Still monitoring the situation- wondering whether other Air Line owners have experienced similar problems (which may be reassuring if this is the cause and I licked it) or I am still chasing electrical gremlins. TIA.
128x128whart
whart's avatar
whart OP
3,036 posts
 
Well, here's the latest, since it's a holiday weekend and I wasn't going to reach anybody by phone anyway- I rearranged the electronics so that everything is plugged into a Shunyata Hydra, and still have the compressor plugged into my 240v step-down transformer. No more zapping noises! I thought I heard some mild zapping before I took the Shunyata step (the Lamm line stage and TT power supply were originally plugged straight into the wall), but I know that hooking up the compressor to the step-down transformer diminished their severity. It seems like getting everything run thru the Hydras made the additional difference- although the cynics among you may say that, by simply unplugging and replugging everything in, perhaps I did something else!
Dunno, but, right now, I'm making music, not zaps and it doesn't get better than that. (Famous last words, of course).
Thanks for the input, everybody. I'll scream if it starts reoccurring. :)
rugyboogie
199 posts
 
Hi Whart
I am taking delivery of my Airline this coming Friday. I will let you know if I get any strange noises. Did you do the set up of the arm yourself?
whart's avatar
whart OP
3,036 posts
 
Initially, yes. And, its not insanely difficult. The key- as many have repeatedly told me- is the ability to get the arm absolutely level- which means that once you level the platform that the TT is sitting on- you are using it with the XL, right?- you'll need the ability to further adjust the level of the platform with all 177 plus pounds sitting on it. Before taking delivery of the finite elemente stand, I set up the TT temporarily and achieved rough level using a half-assed system of shims. The finite elemente stand makes it far easier, since the pucks are adjustable from beneath the top shelf after the TT/arm has been assembled.
ONce the stand arrived, I had Bill Parrish from GTT Audio come to set up the turntable properly. Mechanically, it worked fine with my setup but it sounds profoundly better after Bill Parrish did his magic. The VTA adjustment is now zero'd and I can make quick adjustments without tearing my hair out. We are using the adjustment mechanism on the arm itself, not the one that comes with the arm tower.
Highly recommend competent setup just to be sure. And yes, I'd be curious to know if the compressor creates any electrical disturbances in your system. I'm still gonna follow up with Parrish and Markwell on that issue, even though,through the combination of the stepdown transformer and use of the Shunyatas, I may have eliminated the problem.
limsp
1 posts
 
Hi Whart,

I have experienced the same problems. Problem can be solved by fixing a Zero switch Box in the compressor. Speak to your Kuzma distributor or you can call/e-mail Mr Franc Kuzma (386)42535450 / kuzma@s5.net and he can explain everything to you about the zero switch box.
qzm
1 posts
 
The electrical noise generated by the compressor when switching on, occures every few minutes and is similar to that which occures when a domestic refrigerator switches on. It is transfered via the mains not the air and can be solved by having a separate mains feed. If this is impossible or ineffective however, we have a "zero switch relay kit" which can be installed in the compressor and which normally solves the problem.

Franc Kuzma,www.kuzma.si
More to discover