Hi Lew, no you don't sound negative at all: my answer to you is that we take what we can get. Rick is an incredibly generous fellow, and who knows, maybe he will even be willing some day to transfer his tonearm/cart to my Lenco, I'll have a blank armboard ready and a drill-press!! But, I totally understand him if he doesn't want to start discombobulating his pricey SME to further the experiment. I have no cartridges which can compete with the Benz LP and Clearaudio Concerto in my arsenal which are not tapped and so useable with the tapped RS-A1, I will have to finally strip the threads in my RS-A1 and make it useable with tapped cartridges: THEN we will be able to perhaps simply plunk the RS-A1 on one turntable and simply swap it over to the other for a fair comparison (but given the SME 30's suprisingly compact dimensions, this necessitates complete removal of the Graham Phantom). He is certainly curious, so who know? But, our neutrality vs musical truth dichotomy continues, and so is the Shootout which continues for Round Three next week!
It turns out my Lenco has a faulty idler-slide mechanism, too loose and no way to fix it without replacing it, seems there was some variation in these and we must be careful in swapping parts from one Lenco to the next (there is also some variation in the length of the idler-wheel arms as I recently discovered as well). The result of this will be further improved speed stability and even better sound. We also discovered that the Concerto was MUCH happier in his system on the JMW tonearm than on the SME IV tonearm, which was killing the highs (this may be due to the complex wiring arrangement for the SME, as his preamp accepts only balanced Neutrik connectors, which necessitated complex connections, some of them plain cheap and bad (no way to find special female RCAs for cable termination). This in turn meant: SME tonearm cable to cheap female RCAs, in turn soldered to three-conductor balanced cable to Neutrik. Perhaps the changeover too from SME cable to Cardas via the cheap RCA created a high-frequency barrier. Or the JMW is quite simply the better tonearm ;-) (in my system however, the SME was superior, but this with the cable direct to preamp). The cable I made for the JMW, however, goes direct from the RCAs at one end to the Neutrik at the other. Incredible that Rick lets me take care of these various issues and come back with a fresh Lenco next week! In the interim, while the Lenco is still more powerful and "musical" (in terms of dynamics/punchiness, gestalt and PRaT) - which some dismiss as a colouration/distortion and so of no consequence and in fact a negative (I believe that PRaT and gestalt, the sense of all the musicians being on the same page rhyhmically, IS viable, neutral information, and that this information is far better conveyed by the Lenco/idlers, than by even the mighty SME or any belt-drive, due to the differing drive systems); and some don't question as anything other than musicality and so viable and acceptable "information" (so overall in terms of witnesses we have a bit of a draw) - it was discovered that the Benz LP improved quite a lot when loaded at 47K (while the Concerto barely changed...again might be due to the complex cabling), and a change in VTA made it even better, so it was time to attend to properly setting up the fab Clearaudio Concerto and recover its quickly fading high frequencies (in relative comparison), which is simply THE most musical cartridge I've ever heard (and it's a high-end MC!), and in terms of the usual audiophile area stupendous. More next week when all is attended to!
And speaking of blogs, I AM working on setting up my own website, where I will continue my Rants into the Void, at some point this summer, and continue to report on and share various experiments with various 'tables and other equipment, and more Idler Conquests, Conversions and Competitions! The Firewall will be provided by Raid ;-). Have fun all!!