New Maplenoll Ariadne owner needing advice

Oilman : For soldering , take a piece of 400 wet sand paper gently brush off the laquer on the ends of your wire. Check wire for continuity. Use a Radio Shack soldering holder (maybe available online) make a tight mechanical connection touch the phono plug with a 30 watt iron , touch the iron with the thinest silver solder --There you have it. I have had great sucess with the new battery operated solder devices but take care the carbon-type tips crack and keep a hand full of replacement batteries nearby.

Oilman: A suggestion . Eminent Technology is currently selling a carbon fiber wand for the ET 2.5 Tone-Arm for $400. Perhaps , Bruce Thigman would consider making a modification of his tone-arm to fit the maplenoll ? Bruce's knowledge-base is significant regarding the Maplenoll Tone-Arms. His email is brucet@eminent-tech.com Should he respond in the positive , I too would be interested. He also has developed tone-arm wire second to none for airbearing arms.

Oilman :
I spoke to Mr. Thigman who declined for business/cost reasons to participate ;however, he is forwarding some arm wands that may or may not fit w/o modification.

Mr. Thigman did advise that I his knowledge base is confined to his air bearing arm and that dispite claims on the internet , he actually had no personal involvement in the development of the Noll lineup.

please let me know about the wands. I have a couple of graphite tubes that I had made so I would love to compare to his design. Once i get the VTA clamp built, I will send you one to see if you like it. It will be similar to the one used on the walker table that will allow the arm tube to extend past the spindle thus allowing for a ridgid clamp between the armwand and the air bearing spindle. this also eliminates tedious adjustment for overhang on the cartridge. I am still looking at how to design the dampening trough so it does not have to hang over the record. Again will be something similar to the more current type designs.

Oilman: Anything that is forwarded by ET that can be considered an improvement shall be openly shaired.