New Maplenoll Ariadne owner needing advice


I have recently purchased a maplenoll ariadne. I have tried to learn a little about the table but find very little information. I know the table was discontinued in the 90's but the little i have found indicated it is a very good table. I am interested to learn if there are any tricks or problems to optimizing this table. As most of you probably know, it is an air bearing platter and tonearm. I plan on putting my zxy airy 3 on the arm once I get it set up.
oilmanmojo
Has anyone ever considered adapting a rim drive unit (Teres or VPI) to be used with your Maplenoll?

Seems like it would be the best of all worlds...rim drive, air bearing and heavy platter, air bearing arm.

I had asked Chris Brady at Teres about using his system on other turntables and he said its certainly possible, even with very heavy platters such as the Maplenoll's.

-Jim
That's a good question. I have no recommendation one way or another. I suspect the rim rider will not be acceptable for any of the earlier TT without modification, & that may apply to later models. Perhaps Chris could view the photo's on this site and the 'noll mod and make a judgement. If that's not enought, Chris may directly contact me since I am rebuilding a Ari, having 18 plus years of experience with the Tables.
Maplenoll'ers: FYI, AG AD#1224107516 for Maplenoll Ari. Signature (70lb. platter) w/ Walker extras (NOTE : no air pump that's $400-$800 lay-out)Asking price, $3250.00 US.
Further observation : For those interested in the Signature Table , just a reminder the table does not appear to have a complete air control system (DIY $200-$300 US), that's in-addition to the need for a silent air pump. Also, the pictures do not appear to show all parts for the oil bath unit, better ask about that. Note: The air bearing plates are identical to those in all 'Nolls including mine. All the best.