New Maplenoll Ariadne owner needing advice

FYI : I have been corresponding with the motor housing source in Hong Kong , and between Piedpiper & I . After, many weeks of questioning , it does appear that we may have a go with the soft motor mount. More soon.

Charlie
Have not heard from you recently. How is your project going. I just purchase a used signature and have recieved part of it today. I will comment (similar to piedpiper) that the plinth on the signature is a much more professional piece of work. This machine will require some work to get it up and running well. In particular, i am interested in your approach to the center pin replacement. The center pin in this one is shot. I believe there is a replacement in the spare parts box that has not arrived yet. I looked at the thread several times but can not find the reference to the center pin. I believe you were going to replace with delrin versus teflon or plastic.

I will also replace the stock leveling spikes with valid points or still points as the existing spikes are deformed due to the weight of the table. Also, the tonearm is kind interesting. It is more stable that the one on my reference table but it is not a thing of beauty. It appears that an aluminum tube was pressed to form a headshell that that became the armwand. I will try it out before I modify it, but I like my method of adjusting vta on the fly and the overall appearance of the carbon fiber arm and wood headshell. Also, this table does not appear to have a tonearm lift so i will need to make one for it. I shake too much to handle the arm directly

Overall, it is a beautiful table that i will enjoy modifying. I will post some pics as i get this one up and running

congrats and good luck!

Thanks. If you would be willing to share some details around your motor isolation, i would appreciate it. Since i have a table that is working pretty good, I do want to take this time to modify the signature to capture some of the ideas that have been discussed on this thread. Your motor isolation is one that has not gotten discussed much but seems to be a great modification. I will have to set up an air system with this table but a lot of that is already discussed earlier in the thread.

It's pretty simple. You just need to remove the bolts that hold the lead motor mount plate and create some sort of mounting for it that can be positioned at the correct height to accommodate the belt going over the plinth and under the platter, assuming that your pulley is designed to work with the subplatter rather than the platter itself. If it is the higher speed motor that interfaces with the platter rather than the subplatter then it is easier. In either case you must find or make a much longer belt and possibly a different pulley to accommodate it. I use a thread but have heard good things about audio tape. Either one requires turning a new pulley, which I've done on my lathe. Obviously getting the size exactly right is critical for speed accuracy unless you have a speed controler. I'll be constructing such a motor mount soon for Crem1.