2. analog
  3. 1169082593

tonearm match ZYX Universe Moerch and Triplanar

I decided to take a much bigger analog plunge

I'm working with Mehran on a tonearm for a Zyx Universe
between the Moerch DP6 and Triplanar VII. Mehran is really great - a true audiophile gentleman.

the precise dial in setup of the triplanar interested me (particularly because I am a relative neophyte at this) but it's a bit more expense.

I currently have a Nottingham Spacedeck which I'll eventually upgrade from but the Moerch drops directly into the Spacedeck mount and others here tell me the Notts match well with the Moerch.

Can anyone commment on the synergy of these two with the Universe? later flexibility with other tables? any other helpful jewels of knowledge would be greatly appreciated (I don't want to limit myself like with the Spacedeck).

My listening preferences lean more toward correct tonal balance and engaging dynamics over ultra hi resolution. I listen to a lot of jazz, acoustic and rock music.

thanks

Tom
128x128audiotomb
dgad
782 posts
 
Halcro,

I have and currently own too many cartridges for it to be a system related anomaly. Mind you now it has become an excellent performer but in the Schroder. Not in anything else that I have tried yet. Give it time though I am sure I will try more. My compliance is definitely lower than most peoples.
dgad
782 posts
 
Doug,

It is a Universe Copper.
dan_ed
2,451 posts
 
Hi Tom,

I think I mentioned this to you before but I'll say it again here. The Gavia will sound its best if siting on something like granite or aluminum. I don't think the Nuance would be a good match in this case and I'm having nightmares for you over the wall mount and the Gavia's weight.

You could try a light weight, rigid table. An end table for example. Just put a granite or aluminum slab between the table and the base of the Gavia. And don't use the cones.
audiotomb's avatar
audiotomb OP
1,112 posts
 
Dan - you mentioned not to use the cones etc

thanks for the wake up call
I guess I never factored in 120+ lbs for the Galibier

won't the granite ring a little?

I have a nice granite slab on my target rack but will need a larger one (I buy left over slabs from local countertop sources - they have some great italian red granite that makes this geologist envious)

just a plain table? no audiophile stand?
palasr
527 posts
 
Tom,

I'd guess most Galibier users site the table on a floor stand, especially if you have the added benefit of sitting on a concrete floor. From there, I'd say the field is open - Thom favors building a sandbox with an aluminum top plate that beds into the sand by virtue of some interface between the top plate and sand; several other users have successfully utilized granite or other such stone materials. General consensus from most users is that wood (be it MDF, solid maple or other) is not an ideal top plate material. This is a case where experimentation is in order - the path to an inert surface is frought with variables, including the type of floor and stand construction. You should carefully read over the Galibier FAQ page to get a better idea of the types of surface materials available, as well as strategies for finding the best stand for your situation. -Richard
More to discover