Digital vs Interconnect Cables - Difference?


Can someone explain the difference between digital and interconnect cables? Are they inter-changable? Is digital for connecting CD/SACD transport and DAC?

How about the cables between CD player and pre-amp - Interconnect or digital cables? And between pre-amp and power-amp? Are the same type of interconnect cables?

Also, how many types of interconnect cables are availabe in the market? Digitals - with various connection options?

Thanks.
r0817
whoever tells that you can't use analogue cable for digital signal indeed never had tried that.
Excellent elaboration by Kijanki, with which I agree 100%. An important bottom line point in his post is that a "cable that is perfect in one system might work poorly in another."

Marakanetz, any designer of an electronic system (audio or otherwise) who creates a design in which digital signals whose waveforms have any kind of criticality are transmitted through a cable whose impedance match to the connected components is random and arbitrary should be fired and/or sent back to school, IMO.

Which is not to say that it won't work ok in some cases. But why design a potential problem into the system, when it is easily avoided?

Regards,
-- Al
RO817,
I'll give two examples of companies that use the identical cable for digital and analog use. ASI Liveline and it was very good in my system (one of the best soundihg I've heard).I'm currently using the High Fidelity CT-1Ultimate digital cable and it's just outstanding! Superb natural sound.
Regards,
Almarg wrote "Both analog and digital interconnect cables can be had in balanced or unbalanced configurations. Balanced cables utilize XLR connectors. Unbalanced cables usually utilize RCA connectors, although BNC connectors (which are superior to RCAs) are used occasionally."

Is this true for digital cables? I thought for digital, XLR connectors are for AES/EBU standard and RCA/BNC are for SPDIF, not balanced vs unbalanced?
Back in the early digital days the biggest difference between digital and analogue cable used to be the quality of the copper used, together with the design consideration regarding impedence etc... as identified in the previous posts.

The quality of the copper together with it's design features allows the digital signal to be transmitted "cleanly" i.e. as a square wave at very high frequencies - much higher than the analogue bandwidth.

With digital, it is very important that rise to the top of the square wave, it's duration at the top and it's subsequent return to the zero position creates as close to a square waveform as possible, so that the receiving equipment, e.g. a DAC, can recognize each "bit" of data that is transferred.

Since the advent of digital, the quality of copper used in all cables has improved to the point where "Analogue cables" will work quite nicely when used for digital purposes.

Using Digital cables for analogue will also work extremely well since the bandwidth of digital cables tend to be very high (MHz - GHz) - far in excess of the analogue signal requirements (kHz). However, digital cables can have a higher capacitance/impedence than analogue cables, which can colour the sound.

So what's missing from digital, as implemented in the audio world?...

> When a computer transfers digital information to a USB stick there is a series of checks and balances performed to determine if all the data, in a spreadsheet for example, has been received by the USB stick - if not it is re-sent. After a few failures the process generally issues a warning and halt the transfer.

However, with digital transfers to a DAC (e.g. internet streaming or data from a CD transport), you never know if all of the signal gets to the DAC because the "checks and balances" are not performed and the DAC "fills in" the missing information and still manages to create a very good analogue signal.

So, using an analogue interconnect may sound as though it's working very well, but the DAC is actually making it sound that way.

Using a digital cable will not "guarantee" all the data gets to the DAC either, but the success rate tends to be significantly higher, because they are designed for digital transfers.

My own personal experience with digital cables has proven to me that using a digital cable with the highest bandwidth available (currently using 150mbs) improves the analogue signal from the DAC significantly.

Using highest bandwidth optical cables available also results in significantly better sounding music.

However, I still use analogue cables for analogue signals.

One day the two may converg and we will simply have "interconnects"

BTW - subwoofer cables are designed specifically for extreme low frequncies - you can use a regular interconnect or a digital interconnect, but they won't work quite as well.