Lubricate track of straight line tracking tone arm


I have just set up a relatively mint condition Sony PS-X800 turntable with its straight line tracking tone arm.
What is the recommended lubricant for the track along which the short, straight tone arm slides?
WD-40 has been suggested, but I could find no reference in the online user manual as to any specific recommendation.
Any idea other than WD-40?
This unit is beautiful to look at, and is sounding surprisingly good with a seller-installed Grado Black "bottom of the line" cartridge.
The push button features are making it easy for any family member to play records.
But, need to get that track smooooth.
listener57
Try a product called Tri-flow. I believe it't an oil based lubricant with a silicon additive. I had a nasty squeak on my cd player's drawer which this stuff cleared up.
I would not use anything that would make dust stick to it. Just keep it clean by wiping it down with a lint free cloth.
Strongly agree with Rwwear. Straight line trackers and conventional pivoting arms both rely on finely machined finishes to reduce bearing friction, not lubricants. Anything that leaves a residue on your arm's track will lead to problems, which rules out lubricants by definition.

FWIW, WD-40 would be among the worst choices. Inspect any part you've "lubricated" with WD-40 after a time and you'll discover a gummy residue. That's the last thing you need on the track of a super-sensitive device like a tonearm. Oil- and silicone-based lubricants are also undesirable in this application. With respect to Timrhu, a tonearm is not a CDP drawer.

If the track feels rough to the touch or the arm's motion isn't smooth you may need to polish the track a little. The proper polishing material or cloth will depend on the material the track is made of, please don't go at it with sandpaper. ;-)

Otherwise, just keep it clean and keep it dry.

It occurs to me that graphite might be an appropriate non-gummy lubricant. I just Googled the Sony PS-X800 turntable and found it on vinyl engine where you can download the service manual. I just did and couldn't find anything about lubricating the bearing.