Yes, there is a difference in output level based on record speed. Most manufacturers use either 3.5 or 5 cm/s. The higher the speed, the higher the rated output. I have an Audioquest AQ7000Fe5 cartridge with an output of 0.5 mV at 5 cm/s and I have a phono stage that has 62 dB of gain. My preamp has 26 dB and my amp 26 dB of gain. Your Colibri is a first-rate cartridge, so my suggestion is to buy an outboard phono stage with more gain than the gain in your preamp, and run the output of the phono stage into the line stage inputs of your preamp. If you buy a cartridge in the 1-5 mV range you will probably lose resolution and it won't sound as good, so I would get a phono stage instead. Your preamp manual should show how much gain it has but obviously it is not enough. Also, you might call or e-mail Hovland and see what they recommend. Perhaps you could send your preamp to them to have the gain increased. I think you will need about 55-60 dB of gain minimum for the phono stage. I also had this problem with my CAT preamp not having enough gain and buying an outboard phono stage made a huge difference in sound.
cartridge output level
Hi all,
This is Marco from Italy, I have a question about how a cart output level relates to volume knob position.
Let me explain: my VdH colibri is rated .45mv@5.7cm/sec, it goes into the mc phono stage of an hovland hp100 tube preamp, no complaints for the sound but the preamp volume knob is often in the 3 o'clock position, and anything below 12 is not enough.
Now this preamp phono stage is quiet enough up to 1 o'clock, above that the tube noise is audible, not to a level to ruin the listening pleasure, but is there.
I would like to be able to play with the volume knob between 10 and 2, the question is, if i could get a new cart, how do I know the correct output level to achieve that goal? I wouldn't want to end up not being able to go beyond 9 o'clock either.
Also, is there a difference in output level at 5.7cm/sec as per VdH spec compared to 5cm/sec of other manufacturers?
I know the simple answer is to try other carts in my setup, but unfortunately that is not an option here.
Any advice for a suitable cart is very much appreciated, I listen to jazz 60%, classical 30%, pop/rock 10%, I like lively dynamic sound with huge soundstage but not dry or too bright.
Thank you all,
Marco
This is Marco from Italy, I have a question about how a cart output level relates to volume knob position.
Let me explain: my VdH colibri is rated .45mv@5.7cm/sec, it goes into the mc phono stage of an hovland hp100 tube preamp, no complaints for the sound but the preamp volume knob is often in the 3 o'clock position, and anything below 12 is not enough.
Now this preamp phono stage is quiet enough up to 1 o'clock, above that the tube noise is audible, not to a level to ruin the listening pleasure, but is there.
I would like to be able to play with the volume knob between 10 and 2, the question is, if i could get a new cart, how do I know the correct output level to achieve that goal? I wouldn't want to end up not being able to go beyond 9 o'clock either.
Also, is there a difference in output level at 5.7cm/sec as per VdH spec compared to 5cm/sec of other manufacturers?
I know the simple answer is to try other carts in my setup, but unfortunately that is not an option here.
Any advice for a suitable cart is very much appreciated, I listen to jazz 60%, classical 30%, pop/rock 10%, I like lively dynamic sound with huge soundstage but not dry or too bright.
Thank you all,
Marco
- ...
- 38 posts total
- 38 posts total