2. analog
  3. 1193712682

Cartridge for older Thorens TD 165C

Hello vinyl SMEs,

I can't seem to set-up my Shure V-15 VMR well enough to eliminate distortion during quiet passages. Most of my vinyl is almost new by the way. I tried alignment tools and test records to no avail. My guess is that the Shure is not the right cartridge for this TT – too compliant perhaps. I have a Thorens TD-165c in mint condition with the original TP-11 tone arm and TP-60 headshell. According to the Analog Dept., effective mass of the tone arm is 16.5 grams.

I also noticed that resonance with the Shure is a low 6.6 Hz which puts in foot fall territory. This explains the bouncing in the grooves if I walk too closely. It's tracking at 1.25 grams with additional anti-skating and weight for the stabilizer brush.

So, what other cartridges would work with this TT besides the Shure? Preamp is the one tube wonder by Bellari.

Thanks
av2k
Post removed 
joe_in_seattle
114 posts
 
Your mileage may vary; costs nothing to try it. I also thought I "heard" the brush, and didn't like the sound.
av2k OP
17 posts
 

Found something that improved the sound. I replaced the fancy aftermarket turntable mat with the original rubber mat and surprise! Sounds much better. Apparently, the greater thickness of the aftermarket mat negatively affected the VTA.

I still believe this arm is too heavy for the V15 Type V-MR, but, it sound OK for now.
More to discover