Rec's for a dull sounding analog system

Patrickamory
Maybe dull is the wrong word. I compare it to my wadia 301 cd player (that's all I have to compare it to), and maybe I'm asking a bit to much, but I would like the dynamics and clarity of my lp12 to come as close as possible to my digital playback. I hear all these folks beaming how their analog playback "blows their digital away", but I don't hear it. Not exactly apples to apples, and we all know analog will sound "differenct" than digital. Anyway, my deck was set up by Brooks Berdan here in S Cal so I have confidence in the setup. Also any upgrade would be done my Brooks. Obviously, I need to start somewhere.

This is curious. A "better" TT provides better information retrieval (i.e. extension, dynamic impact, etc) -- but even your bog-standard Linn should be superior in many ways to yr Wadia -- esp as it's been set-up by experienced people.
So, the problem is downstream. The phono loading is one likely culprit. The phono itself, another. I would check the loading first. Yr cartridge specs 32ohm internal impedance & recommended resistive loading 400-47k Ohm. This wide range is hardly helpful, esp in the absence of inductance or recommended capacitive loading. I checked a Stereophile review of this cartridge -- but they don't give the loading they used either -- or I missed it.
So, either your dealer or you, try changing the resistive loading & report back -- before you purchase anything. You might also check the capacitive loading in yr Mod and mail Benz, and pray for a response. Cheers

Holmejr, I think I had only half a brain working when I first posted to this thread. You say dull-sounding analog, and you have a Linn. That should have rung the big Linn bell, the table setup bell.

All LP12s need a suspension setup at least yearly. If they don't get it they lose their wonderful liveliness and pace and start to sound, well, not dull and draggy perhaps, but getting there. LP12 setup needs to be done by a properly trained technician, of course, not the normal TT owner. Was your last setup done awhile ago?

Your table may also need to have some suspension parts changed if it is very old. Linn sold a spring and grommet kit called the Nirvana at one point, but it may no longer be available. I presume Brooks Berdan has already looked after that, but if you're not sure, it might be useful to check.