2. analog
  3. 1194448880

Suggestions for stretching turntable belts?

I have had a great deal of dificulty finding TRUE 35.1" turntable belts (as used by Sota,the Luxman PD 300,B+O 4002/4004,the Empire tables and some older Pioneers.I have gotten them from many sources- PRB,Ebay,etc. and they all seem to measure about 34".Needless to say with a floating subchassis table this will not work as it pulls the platter toward the motor spindle.In some cases it will even jump off!Is there a good technique to uniformly stretch these? I have even painstakingly cut the belt in half length wise with an exacto knife to try to reduce the tension.
donshoemaker
Ag insider logo xs@2x
ncarv
983 posts
 
Possibly:

http://www.kabusa.com
KAB
P.O.BOX 2922
PLAINFIELD, NJ 07062-0922
908-754-1479 PHONE
swampwalker's avatar
swampwalker
5,138 posts
 
A work around of course is to use your tt "pitch" or fine speed control with a strobe to compensate. Stretching is definitely not the answer. If fact, a good argument can be made that a stretchy material is not appropriate for a tt drive belt.
donshoemaker OP
38 posts
 
Hi,thanks to all for your advice.Swamp,the issue is not the pitch/speed,it is that it disrupts the floating motion of the suspension as it pulls the platter closer to the motor.On a fixed suspension table this would probably not be an issue.I would like to know where Sota sources their belts from as I have four tables that use this size belt and can't bring myself to pay the $25.for each belt.Call me cheap,but if someone knows where I can buy these at a reasonable price I will buy a dozen!
More to discover