Great Cartridge for Graham Phantom

Minimum level is fine.Just add or subtract a tiny bit at a time,for perfection.Based on YOUR tastes.
Good luck

I find the Titan I to be very dynamic in the Phantom. IF you put too much damping fluid you will "slow" down the cartridge & it will not sound live. How much do I use? Not sure but not a lot. I tuned by ear. As the cartridge breaks in further tuning might be needed. The Phantom is one of the most live sounding tonearm I have tried if you don't add damping fluid. I tried a few cartridges that way. No tracking problems are anything just a little edgy. The little bit of damping fluid removed the edginess.

As for setup, honestly, I checked the Phantom setup tool myself feeling it to be not 100% accurate against the DB Systems protractor using the magnifying glass. It was spot on. I was surprised but there was no deviation at all between the 2 null points. I thought it would be off.

Now, a final point and this is a big one. What tonearm does not change HTA whe you change VTA. Basic geometry. Slight changes in VTA will do very slight changes in HTA if you have a fixed bearing. I do check HTA if I do a major change in VTA. Mind you, must arms the VTF changes if you change the VTA too much. Just simple physics.

What is the recommended weight for the cartridge being used for this tonearm.

Not 100% sure as nothing in the manual but it should handle from 6-12 gms.

Thanks DGad.