2. analog
  3. 1199935474

what is this noise caused from possibly

New to phono. have project 2xperience and tube box se2. cj preamp and amp and b&w speakers. Now, some records play just fine and sound great to me, (not ever really listening to vinyl). All my records are new 180g and 200g. I have a new vpi record cleaning machine and last stylus cleaner and preserve or something. On some notes I get a screathing sound if that is the way to describe it. most noticable whan not much music is going on and for example norah jones, sings softly (good) when she reaches down and lets out a bigger note (screathy) mostly right at the beginning of the note. With lots of piano and soft voice all is good i think. by the way this happens in one speaker and not the other. Tryed adjusting tracking force from min to max. antiskate is properly installed. tone arm seems to be parrallel to record. don't know how to adjust azimuth and manufacturer sais its adjusted from the factory. will listen to more records and see if I notice it more.
thanks
beerdraft
Ag insider logo xs@2x
islandmandan
1,260 posts
 
I'm fairly new (after 18 years away) back into the vinyl wars, and my first table when I got back in was a Project Experience2. As I recall, you are correct about azimuth. I experimented with anti-skating, and found on that table, with that cartridge, using a/s or no a/s made little difference in the way it tracked, either way I never heard what you are describing. I have learned that proper alignment and overhang is the real critical thing. It's amazing how just a tiny bit of difference in set-up makes a large difference in how distortion-free your arm/cartridge tracks. If you live in or near a large city, and have a good analog retailer available, have them check set-up for you. It'll cost a few bucks, but it'll be worth it, and maybe they'll give you pointers to help next time. Good luck, and enjoy-
Dan
beerdraft OP
198 posts
 
Hey Dan, funny, the sumiko guy just emailed me and said he thinks its in the overhang. Can't remember if he said to much or to little but I needed clarification on which way to adjust the (I geuss the VTA) up or down at the base of the tone arm. This is like trying to learn A forign language, and the only reason I got thru two years of spanish is the fine blonde girl who sat in front of me both years. I can't speak a word of it though.
thanks
miner42
709 posts
 
The cheap shure that Stringreen is referring to is a VTF scale - a meachanical one thathas been around for years. can be bought for about $20. I personally use one by Steve Blinn desigs - a digital one that is accurate to .1g. It was only $89. He sells them here on A'gon.
beerdraft OP
198 posts
 
great I'll check into those. Is there a scale for measuring the overhang or vta I think? How do you check the azimuth. Maybe I need a kit for this if there is one for the whole setup because I may upgrade cartridge soon anyway and I would probably have to know how to do it all then.
thanks
beerdraft OP
198 posts
 
how do you adjust overhang? is that the same thing as VTA?
More to discover