Cartridge upgrade for VPI Scoutmaster

>>12-04-08: Azmoon
I agree that the VPI arm is actually very good and the 10.5i is excellent. Triplanar and SME cannot compare.<<

Please list all of the cartridges you've used along with the specific SME tonearms to support this assertion.

This should be interesting.

I'm pretty impressed with the Airy 3. The dynamics are incredible. This is a very enjoyable cart. Very spacious, clean, and defined. Well rounded, though I am still getting it set up "right". I set the VTF at 2 grams as per the original owners suggestion (same TT and arm) after some experimenting. I am running it single ended into a Pass Labs Xono phono stage (the only way INTO the Xono), and balanced out to the X-1 pre. Cables are HT Magic. Cart loading I set to 199.36 ohms initial as per my last cart. I'll tweak this after I get the cart set up physically correct, and post what settings seem to work best in my rig to my ear. I’m also working on setting the Azimuth. I have some voltmeters ordered online to help me out with this. I set the VTA almost level (a little bit negative) for 180-gram vinyl.

Wooten,

I have the Airy-3 and a Pass Ono which is very similar to your Xono. I think you will find that the loading will sound best between 80-136 Ohms depending on the phono cable you are using.

If you test the varying settings, and find your best setting is something outside this range, please post back. I am happy with my setup, but am willing to experiment with other successful parameters. ;-)

Darrell

Dmccombs
Thanks for your input. Only a Xono owner understands the unusual load settings for this phono pre. I will try your settings after I get my cart tweaked more properly. I am using the loading I set up for my Dynavector 20X-H. I use HT Magic in and out (balanced out), and throughout my system. What cables are you using? Are you running balanced or single-ended out? What pre-amp are you using?

Wooten,

I was using a XLO phono cable. With that, the best loading I found was at 81 ohms.

Then I changed to a Purist Audio Venustas. I could immediately hear that the loading was different. With that cable, I found that 100ohms was best.

As the Airy breaks in, people have found that the loading requirements change. Since you bought your used, you may not have much of a break-in or loading change.

Darrell