Scout Owners: How Much Cartridge?

Scout is sited on a Symposium Svelt shelf that rests in a Target wall mount bracket. Arm is the stock JMW-9 and the preamp is an ARC SP-16. I am looking into a separate phono preamp as part of this cartridge upgrade--perhaps an Art Audio Vinyl One, Whest 2.0 or an ARC PH5. Thanks for your assistance.

Hi, I am using a Dynavector XX2MKII on my Scout. I noticed an improvement immediately, but it didn't shine until I put the Signature Arm on it. I have stabilized motor speed with a PS Audio P300 Power Plant, and upgraded my phono stage. This table sounds superb now. If later on you should decide a better table is in order, you won't have to buy a better cartridge to hear the difference, you'll already have it. Works for me.

Enjoy!

Dan

Total gain with ARC SP 16 is 54 dB, should be OK with MM or High output cartridge, I suggest Sumiko Blackbird with that amp. If you are ready to ad an additional phonopreamp, the choice is much wider. I suggest the Graham Slee Revelation+ Elevator (SS) because you can adjust cartridge loading and has many equalisation curves if in the future you ad a mono cart. It is a wonderful phonopreamp with wide band, also price effective. For the cartridge , the Lyra line is very accurate and dynamic, the Helicon is for me very very good for the price.

I am in the same boat with a Scoutmaster with non-signature arm. The arm is the limiting factor here, this is a low mass, if not ultra low mass arm, most of the higher end cartridges have lower compliance than the Dyna 20x, this arm should not track well with those cartridges. You can add weights and/or Cartridge Man isolator. Still, my choice will be to go with the 10.5i arm prior to upgrading cartridges.