What is your cartridge and tracking force used


Share your actual setup or numerous setup you liked.

Actual for me: Grado Reference Platinum with recommended 1.5g (from .75 to 2) tracking force. Im still trying to find the best one but im always coming back to 1.5.

Thanks
dobermann
ZYX UNIverse on TriPlanar VII
Recommended: 1.70-2.20g
Useable range: currently 1.45-1.60g (subject to change, see below)
Sweet zone: varies with weather and is always very narrow, just .01g wide or so, we fine tune daily and sometimes per each LP, by listening
Antiskating: is now virtually zero, no weight on the dogleg at all

A bit of explanation: our current acceptable VTF falls somewhere between 1.45-1.60g, but that does NOT mean we can play anywhere in that range and get decent results. All that range means is this:
- on the hottest/most humid summer days we play as low as 1.45g
- on the coldest/driest winter days we play as high as 1.60g
On any given day the sweet spot will fall somewhere between those limits, but no matter where it falls the sweet zone itself is always extremely narrow. Move more than .01g away from today's sweet spot and performance deteriorates.

Raul heard this during his visit a couple years ago. The cartridge sounded great during a long afternoon of play. Then we took a two hour dinner break and it cooled down (winter day, very cold and dry). When we started playing again in the evening the bass had gone lightweight and dynamics were weak, a sign of inadequate VTF. I added .015g and BANG!, we were back in the sweet zone.

As Oilmanmojo found, tracking a UNI at lower than recommended VTF's is not automatically possible. Mine didn't track at 1.50g when new and there was no need. Performance was ideal at 1.90g or so. It's only after many hours (1,000+) that tracking below 1.70, 1.60 and even 1.50 became possible and sounded best.

It's been the same with anti-skate. When the UNI was new we needed 6-8 little O-rings on the dogleg. Then we needed 4-5, then 2-3, etc. Now we don't need any, the weight of the empty dogleg is sufficient.

Clearly the suspension is relaxing with advancing hours. This has required adjustment to below the recommended range but there's a positive side effect: the tracking of really difficult passages (not a new UNIverse's strongest point) is much better than it used to be. There are one or two torturous spots in a handful of LP's I could never play cleanly. Now I can, and at much lower VTF's than we used a year or two ago. Practice makes perfect? :-)
Well, my VTF is normally done 1x and after that I only change it, when I use the cartridge in a different Arm. I have different settings for example with the same cartridge in the Phantom than in the Airline or DaVinci. With the FR-Arms I go to the lowest recommendation from the manufacturer.
But honestly, between 1.89 and 1.90 I don't invest much time, then I'll leave it the way it is.
I found the recommended tracking force (1.85) was the best on my set-up. I tried .05 increments from 1.5 to 2.1
Dear friends: Doug is right and bring a subject that is very important on the cartridge quality performance: temperature, we have to take care about.

Regards and enjoy the music.
Raul.
Soundsmith "The Voice" ebony, recommended .5 to 1.1, now at .8, trading off a little sibilance on really hot records for the best midrange sound overall.

Dave