Would Like To Hear From Strain Gauge Owners


I would like to hear from owners of Strain Gauge cartridges (particularly Soundsmith owners)as to how you like the strain gauge system compared to previous cartridges you have owned. Is there any drawbacks to the Soundsmith Strain Gauge system?

I am located in the Cincinnati, Ohio area. Is there any Soundsmith Strain Gauge owners in the Ohio, Kentucky, Indiana area?

I read the review of the Strain Gauge system on Audiogon by Vac man. It was a very good review and answered many questions for me. I would like to hear from others who also own strain gauge cartridges.

Thanks in advance for any info that you can give me.
slowhand
Dear Slowlearner: +++++ " Attacking products is not only counter-productive.... " +++++

first than all I'm not attaking the SG, what I'm saying and confirm here is that IMHO it does not conform according the RIAA eq standard: I respect your opinion that it do it but everything you have in your web site and what you posted here tell nothing precise about.

All the " history/facts " that you posted on the RIAA response deviations with changes in VTF or VTA or with a different tonearm is our " bread of everyday " and this is not the subject because what you are saying is that why take care on the RIAA eq. deviation when there are so many deviations all over the audio chain, well that is a point of view that I respect but certainly I don't agree because I think that we must care the audio signal at any single link in the audio chain trying to loose the less and adding the less too.

I know that your trade-offs and music sound reproduction priorities are unique and different from the ones I support but things are that I heard the SG in a very good audio system ( with low system distorions ) and I heard there against a MC cartridge with the same LPs and from that very first moment, and way before I knew that the SG does not conforms with the RIAA standard eq ( I know/understand this in the last 48 hours ), I don't like the overall SG performance against other MC/MM cartridges that I heard and I told this to the SG owner inclusive I remember that we play with a LP that are one of my reference LPs ( Janis Ian/P. Barber ) trying to hear something that the SG was loosing in the HF, even Steve modified a little the VTA and things improve a little but never with the definition that I'm accustom on it but this is not the whole history about, only an example. Today I undertand why the SG has not that HF definiton I'm talking about and why its performance is so un-natural.

I don't take care why its sound is so different till two days ago when I made some research about.

+++++ " it was +/- 1dB from 50 Hz to 12K in conformation with RIAA " +++++

Peter, you made an " assault " to my intelligence, common sense and knowledge with that statement.

first the RIAA eq standard frequency range figure is : 20hz to 20khz not the range you measure.

second are you saying that a very high ( IMHO always ) 2 ( two ) db deviation goes in conformation with RIAA when almost all the phono stages out there that conforms according to the RIAAA standard are in no more than 0.5 db?,
from your point of view I have to assume that if in the future any other different " cartridge " device with say: 5-10 db on RIAA deviation can/could conforms with it?, my God!

Peter IMHO if exist an audio link where every tyni frequency deviation is showing it is on the phono stage through its curve RIAA eq. deviation where any single frequency deviation affects almost three octaves!!!!!, you can hear deviation on the 0.1db range ( at least ) and you are telling me that 2db is the way to go but more important that this is that you say that comforms with the RIAA eq. standard !! ??????????????

Here it is a link where another person that I respect ( like you ) and that I think is very " responsible " and with a high knowledege about and he was asking ( in different words ) and questioning almost the same I'm and from my point of view it does not matters to ask because if we don't ask how we can learn or be sure on anything?:
http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1201835625&openflup&13&4#13

Peter I don't have any single/simple/minute attitude to attack you in anyway so don't put on " defense ", I'm only trying to have things in the right perpective ( Dan: believe it or not ) because at this moment my " common sense " still tell me that the SG is an additional source device but not an alternative to other MC/MM cartridges, I will consider it an alternative to MC/MM cartridges when your design conforms correctly in a precise way with the RIAA eq. standard.. Peter why don't try it, seems to me that that could be great and a very good alternative.

Peter, one way or the other almost all of us are in the same " boat/ship " and we are looking for almost the same main quality audio music sound reproduction performance targets.

Regards and enjoy the music.
Raul.
DISCLAIMER: Rauliruegas is co-designer and co-manufacture of the Essential 3160 Solid State Preamp with built-in phonostage.
Dear Raul;

I cant read anymore of your posts. Also, the sign off

"Regards and enjoy the music"

is like a diet soda bad aftertaste, and the music now sounds more off-key, not nearly as clear, and nowhere as much fun. Thanks for taking the joy out of my day, and oh yes, for the belated "top of your mind" after-thought on my health. Etiquette is not your long suit.

signing off for a long, long time,

peter ledermann/soundsmith