Turning up the gain on your preamp will not stress your amplifier. What you need to do first is to contact Rogue and ask them if 2.5 mV is enough to drive your amp to full volume. If it is not case closed. If it is you can ask their advice, you don't have to follow it but it can't hurt to have it. If it is it will make no difference to the amp where the volume control is if it is putting out the same number of watts. I would pay no attention to the price of the cartridge, retail price is often a fiction. When I was a dealer I could get a $175 Supex which cost me $87.50 or a $150 Pickering which cost me $15.75. Which one do you think most dealers sold.[not me] All I can say is that the Dynavector has been around for decades in various incarnations and has a good reputation.
Rega P3-24..........w/ Exact or Dynavector 10x5 ?
It seems like I'm going to able to get a fantastic deal on a new Rega P3-24 with the Exact cartridge installed. The package price will be the same as if I got the Dynavector 10x5 installed instead. The Exact retails for considerably more than the 10x5, so I'm pretty happy. From all the reviews, I know that the Exact is a significant improvement over the Elys 2, which is usually packaged with the P3-24. My next step, as soon as the funds are available, will be to buy the Rega TTPSU, to really make the analog front end sing beautifully.
But.....how will the music sound ? I want to continue using the built-in MM phono stage of my Rogue Audio Cronus amp, and simple logic tells me that the higher output Exact will be an easier load than the lower output Dynavector. My worry is that with the Dynavector, I'll have to turn my volume dial too far up, thus stressing the amp, and perhaps "running out of gain." Now, with my 5.0 mV. output Goldring Elektra on my NAD 533 table, I listen to records with the volume dial set at around 2 o'clock. The Exact's output is over 6 mV., and the Dynavector's is only 2.5 mV. Is my concern valid ? I am not able to audition the table with the different cartridges in my system, so I have to buy "on faith."
I've read equally wonderful reviews about both these cartridges, and it seems that each one will make beautiful music through my Vandersteens.....So, fellow Audiogoners, what are your thoughts ? I need some sound advice (pun intended.)
But.....how will the music sound ? I want to continue using the built-in MM phono stage of my Rogue Audio Cronus amp, and simple logic tells me that the higher output Exact will be an easier load than the lower output Dynavector. My worry is that with the Dynavector, I'll have to turn my volume dial too far up, thus stressing the amp, and perhaps "running out of gain." Now, with my 5.0 mV. output Goldring Elektra on my NAD 533 table, I listen to records with the volume dial set at around 2 o'clock. The Exact's output is over 6 mV., and the Dynavector's is only 2.5 mV. Is my concern valid ? I am not able to audition the table with the different cartridges in my system, so I have to buy "on faith."
I've read equally wonderful reviews about both these cartridges, and it seems that each one will make beautiful music through my Vandersteens.....So, fellow Audiogoners, what are your thoughts ? I need some sound advice (pun intended.)
- ...
- 6 posts total
- 6 posts total