Best Phono Stage within 2000 $

I'm pretty sure it is possible. I am counting on this for a future upgrade from the X-1 to the XP-20 using its PS for my XONO. I would contact Pass Labs directly. They are extremely helpful via phone or e-mail.

Used Pass Xono is great value and it sounds great as well.

for tube, you cannot go past 2nd hand EAR 834P

If you like the X-1 the Xono matches up perfect, plus you will have the synergy of the Pass Labs products working together. I'd e-mail Pass and ask if you can use 1 power supply for the X-1 and Xono. I'm 90% sure you can, and I believe one of the power outlets is specificaly for this. Neither pre uses alot of power. I also have the X-1 Pre and the Xono, plus the X-600 monos. I absolutely LOVE the detail and bass of the Xono. It is a very versitile phono stage to boot.
Happy Holidays!

 
$1.5k to $2.5k is a tough price point for phono stages. Of course there are many units in that range, but very few not significantly bettered at the $3k-$4k range. While it seems obvious that more money will get a better product, the jump in quality seems bigger than the jump in price - at least to my ears. For what you want to spend, look at the used market.

That said, there are two sonic standouts that can be had used at your price, the already mentioned solid-state Pass Labs XONO, and the tubed Artemis Labs PH-1. The XONO has gobs of gain if you need it and this can also be adjusted downward if you don't. The Artemis is fixed at 50dB, but that should be enough to drive a .6mv LOMC, but probably not anything lower. Both are nicely configurable for impedance loading and both offer top notch build quality. The XONO has a separate power supply which you will want to keep separated from the head unit, so consider rack space.

I've had both in my system at one time or another for an extended period, and all things being equal (which they never are) I think I prefer the sonics of the PH-1 - especially if you have no other tubes in your system. Both offer an open, spacious presentation with good soundstage depth and width. As might be expected, the XONO offers slightly crisper transients on the frequency extremes and slightly more dynamic impact. The PH-1 is more resolving and lets you hear deeper into the music with more harmonic and overtone information - this yields a touch more of music's natural sweetness. For a solid-stage unit, the XONO is a wee bit on the warm side, which is probably a plus as far as distortion goes, though it doesn't offer quite the level of bloom and dimensionality as the PH-1. Either is a fine component and I could see folks having a different preference than mine. Either should be found used for under $2k. Good luck with your hunt.
 
Tim
 

Thanks Peter for your help and thanks to Srwooten & Jtimothya for your exquisite suggestions.
At this point it's clear I should choose the XOno for a optimal solid state solution and three or four interesting choices for tube units.
I 'll think about and I 'll search in the pre-owned market
If someone else has some other interesting tips about please don't be shy

Merry Christmas to EveryOne