Vintage Denon Direct Drive Turntable

Thanks Raul, for chiming in and filling in the blanks. The lack of manual pitch control was the one I thought was the case (does it have screws underneath to control that way like some of its contemporaries which had pitch control underneath as well?)

Dear T bone: No, the pitch control is on top in the right side of metal ring, as a fact are two knob/button: one to swith from automatic/manual and the button to change ( +,- ) the pitch.

The other difference between the 75/80 is that the 80 torque is bigger/strong.

Regards and enjoy the music.
Raul.

Rauliruegas,
Thanks for your insightful contribution and your encouragement for going forward with the DP 80 project. Any way you could share a picture of these TTs and plinths?

T_bone,
Your research seems to have clearly resolved the who came first discussion. While it is an interesting experiment, I probably won't acquire both, but will use that money on a DIY plinth.

I appreciate the information and cautions of others in terms of what possible problems to avoid when buying.

Tbone et al, In the DP80, when you use the adjustable speed control you are bypassing the quartz crystal oscillator. That's the only way you can get the electronics to agree to change the platter speed, I guess. If the electronics are all copacetic, the platter will turn at exactly 33.33 with the quartz oscillator engaged, but the speed is not adjustable in this mode. This mode is much like the SP10 MkII. Presumably, it's preferable in terms of speed stability to have the quartz oscillator in play.

Raul, Upwards in this thread we discussed the Denon plinths a bit. Kcc123 has a DK2300 plinth, which is a two-arm job and looks like it has nice high mass. Today I hefted my DK300 plinth. It's a laminate of possibly some good quality plywood or hardwood and very heavy; I imagine the DK2300 is even heavier, because it is bigger in order to accomodate two arms. So I am thinking that these plinths might not be so bad. What needs to be improved is the coupling between the tt chassis and the plinth, and I intend to try to achieve that by using much thicker and longer wood screws. Or long bolts that go clear thru the plinth to the bottom side. This small mod plus the dampening of the hollow ring around the platter (see my post above) may be quite effective upgrades, without resorting to a home-made plinth. I do have a piece of slate for the DP80, if that strategy fails.

Hi Lewm,
I think you can fabricate an alloy plinth something similar to mine for my JVC motor unit. Those legs are used as tonearm mounting pillars and can be adjusted for height. They are also fitted with Audio Technica insulators at the bottom.

[IMG]http://i41.tinypic.com/2gsmpop.jpg[/IMG]

[IMG]http://i41.tinypic.com/2mq8geu.jpg[/IMG]