Vintage Denon Direct Drive Turntable


I have been interested in experimenting with a direct drive TT for some time just to see what all the fuss is about. I would be comparing it to my belt drive TERES.

Does anyone have any experience with a Denon DK 2300 TT with the DP 80 Servo controlled direct drive motor? These came out in the '80s, I believe. The base allowed for two arms as well.

Is this TT worth the time and effort?
zargon
I've had a look at a similar thread on another forum, and agree with you Lewm that bolts are best for this job! I have decided to bolt both chassis and tonearm through the top layer only, I will drill a rebate/countersunk hole into the underside in order to secure a washer and nut, that will remain flush when placed on top of the base layer.
It turned out that in my stack of un-plinthed TTs, I had a DP-80 that I had picked up a while ago. This morning, on a whim, I put it in a solid wood DIY plinth that someone had built a number of years ago with a couple of SAEC armboards, and sold on the net for $50, and I installed my SAEC 407/23. Using the old "eyeball-it-and-guess" set-up technique, I got a wonderful TT in about 10mins. It has great stability, and I was reminded yet again how good the SAEC arm is. Upon returning home this afternoon, I spent a bit more time on set-up, and it turns out I was really lucky the first time. After several records, I continue to be surprised at how good it is. I think I need to look into a better plinth, but I am going to keep this TT in rotation for a little while.
T_bone, Raul used a minimalist plinth like that with both an SP10 and a DP80 and liked the results. It would be interesting to use your first effort as a reference, if and when you try to build a heavier/denser plinth for the DP80. I think the DP80 and other top line Denons are under-appreciated in the recent upsurge of interest in DD tables of yore.
Just a quick update.
I've handed over my template to a fella who runs a mill and specialises in slate. I'm going for a monster one-piece 100mm thick 'headstone finish' type slab. The cut-out is tricky (especially at the front where it comes with a couple of inches of the edge, and it will have to be cut with a water-jet, but I'm hoping he'll come through. At the moment I've decided to go for threaded inserts glued into bore holes for the anchoring points.
Treehugga, what are you going to do for tonearm? Get one hole drilled for the tonearm of your choice? Put in a slate insert so you can put multiple slate tonearm boards in?