Need help setting overhang on the Technics SL-1200

Ho72 - actually I have always felt that finding the correct overhang is the most important thing and have always done this before anything else; after the overhang is found I check the tracking force and set the antiskate; and lastly I attempt to find the best VTA. Thanks very much for gcaudio.com link.

Tvad - I have just today set the overhang of the Shure M97 using the Mint Best Tractor and have to agree that the SL-1200 Mk2 now sounds absolutely incredible; I am amazed that I am getting this good kind of sound out of a cartridge that can be purchased brand new for under $100. If you mount the headshell on the Technics SL-1200 white plastic overhang gauge you will see that the tip of the stylus is now 3mm further out. As far as other settings go I have the tracking force set at 1.3 grams and the tonearm height set at 3mm. Thank you Tvad; I appreciate your recommendation to use the Mint Best tractor.

Well I spent the weekend continuing to "push the envelop" with this Shure M97 on the Technics SL-1200. I still wasn't completely satisfied with the VTA and decided to see if the top of cartridge was exactly parallel with the record. I placed the cartridge down on a stationary record and measured the front of the cartridge and the back of the cartridge. The back of the cartridge was lower than the front so I ended up raising the tonearm from 3mm all the way to the 6mm maximum to get the top of the cartridge perfectly level with the playing surface. After listening I have to say this is a definate improvement. Curious if anyone else has tryed this.