New2Analog - Table Setup Help?

I bought the table used, and the previous owner had barely used it, but I was under the impression that he had tuned/set-up the table. I have done nothing to change this setup, as I thought I would get suggestions here. As mentioned earlier, I am looking for setup improvements so I can get the system to a point where I like it, and then will spend money to improve it.

I will work on the VTA. Thanks for the tips guys!

I also will play with the preamp switch under the table to ensure it is in the right place.

Jeff

Also being new to the analog thing, i learned quick that even with a deck set up "right" out of the box, still needs to be fine tuned. make sure the cartridge is aligned properly, the tracking force is correct, and vta...my current deck doesn't allow me to adjust it, so i can't help ya there. so the only way i know to get around that is to use different mats of varied thickness and find what sounds right to you.

I presume your CD or fm is playing as you like it??

Michael Fremer of Stereophile has a DVD on turntable set up. It might be a good investment in terms of understanding how all these issues interact. Setting up a table is an iterative process. For example, many are finding that very precise cartridge alignment allows for lower than typical VTF, which allows for v. low or no anti-skating.

Its very common for TTs to be set up incorrectly, so verify that its been done right and also purchase a 10x loupe so you can see the stylus and make sure its clean. Search the forum for "magic eraser" to find how to make a very good stylus cleaning tool for very low $. If its still not clean as a whistle, try using a v thin strip of fine grit sandpaper and gently swiping the stylus surfaces, followed by more magic eraser and then dry brushing.

CD - Does not sound as open and airy as I would like, which is why I am putting my toe into the Vinyl world. However, at the moment, CD sounds better than the Vinyl for all the reasons listed in my original post.

Cleaning a Stylus with SANDPAPER. Now that sounds nuts. I hear dust in the grooves of records can mess up a stylus, so why would you take 400 or 600 grit (very very fine) sandpaper to a stylus (which happens to be nearly brand new)?

I think I will have to get the DVD, and some coaching from my analog friend.

Thanks Guys! I am still hopefull that I will like it when I am done tweaking.