2. analog
  3. 1234283795

VPI Scout "tweaks"

My analog rig consists of a Scout with JMW-9, Dynavector 10X5, SDS, Sutherland Ph3d, VPI turntable IC, and Gingko Cloud 9. I have the geometry set via MintLP. The rest of my system is comprised of Vandersteen 2Ce sigs, Rogue Magnum 66, Anthem MCA-20 and Audioquest Diamondback IC's and Bedrock speaker cables.
It sounds really good so my question is...are there any upgrades/tweaks that will make a definitive improvement, short of buying a new table? I have about $1k to spend. Thanks in advance.
kmulkey
stanwal's avatar
stanwal
3,147 posts
 
Another thing to try is to remove the rubber feet from the turntable motor and replace them with the smallest Audio Points [Star Sound]. I have just done this with my Aries and the difference was considerable. I took the rubber feet off the Scout motor and replaced it with some sorbothane discs which helped but did not make the same difference. Going to change it next.
theaudiotweak
2,801 posts
 
Joe Grado in 1982 began shipping his 19.95 cartridge with a triangular metal mounting piece that enhanced coupling between his products and headshells/tonearms. The metal piece had three little nubs.Buy a Grado and gets some nubs for nothing. Tom
rocket323
10 posts
 
I previously removed the motor feet and replaced them with partial Isoblocks from Mapleshade. The difference was considerable with this product too. Thanks for your input.
jazzgene
145 posts
 
I placed a dime under the Aries 3 feet as it was digging into the wooden rack. This added a strange resonance to the sound of the turntable. I was able to get rid of it by applying blue tac to the dimes under and over to cover it.
srwooten's avatar
srwooten
694 posts
 
Jazzgene
If you use quarters instead of dimes you'll get a 5% increase in performance. It's the law of diminishing returns. ;-)
More to discover