Anyone own a Pioneer Exclusive P3 ??

Hi Jaspert,

I actually bought the P3 in Japan and got it shipped... Finding it outside of Japan is next to impossible.

I like the C3 alot: the onboard phono stage sound very nice to me; quite neutral, but with a bit warmth in it.. just enough.. I actually have two sets of C3/M3; one set has seen a full revision/upgrade, while the other set is fully original, I want to do some a-b testing in the nearby future.

T-Bone:
Thanks! I will try some different settings with the damping etc.. I might give it a try with the Pioneer PC-1000II and PC-70mc cart as well..

Regards,

Willem

Can these be used with USA voltage/frequency?

Andrew

The P3 is 100V 50/60Hz. It needs a stepdown transformer outside of Japan - preferably a larger one (one which can handle 300W or so). The transformer inside is supposed to be quite a bit larger than most turntables' transformers, according to the repairguy "the transformer is built for a 20W Class A amp". The back panel only says the draw is 15W, but he also has said to me that the peak power handling is quite large - lots of overhead. Because of that I would suggest more overhead in the transformer than you'd normally use with something which says 15W. YMMV...

Maybe Mr. Downunder can opine...

I had a huge stepdown transformer build to power both my exclusive P3 and F3, which are both Japanese domestic 100 volts units.. the F3 tuner is a story on itself, since it also has a bandwidh of 76 to 90 mhz, instead of 88 to 108.. However: everything can be solved!

T_bone: interesting info about the transformer and the peak power handling.. I never really thought of that..

Aoliviero

I use this Kashimura transformer in the link. It is good for 300 watts for 120volts and 200 watts for 240 volts. This is the largest power rating stepdown until you get to those big heavy ugly step downs.

I use one each for my P3 and P10. Completely silent and has worked perfectly.
http://www.joynetmall.com/shop/product_info.php?cPath=332&products_id=3008&osCsid=c339d82c9a46c8babf247565c3a40480

T-Bone, are you saying if I buy one of those big heavy ugly transformers (see link) and maybe noisy my P3 will sound even better :-) ??

http://www.joynetmall.com/shop/product_info.php?cPath=332&products_id=3540&osCsid=c339d82c9a46c8babf247565c3a40480