Budget Turntable

I should have warned you not to get the Technics people riled up...

If he has 50 LP's and no plans to get any more, I recommend the following procedure:

1) Buy a Project Debut III with integrated phono pre-amp and USB output.

2) Play all 50 albums with the USB cable from the TT to your computer.

3) Put turntable and 50 lp's up for sale on Audiogon as a package deal.

Vinyl playback is something of a commitment. If you're not going to "do" the format, do away with it.

You'll feel cleansed.

Cheers.

Like many others I started with a VPI HW-19. Starting from there, and assuming he will soon look for more records, he won't reach top level, but it is possible to get a lot of good sound for not so much money (especially, if he is willing to tweak a bit - much advice on the net).

A "J" arm is longer than a streight arm and, thus, has more mass, and, is heavier. The J arms have been abandandoned long ago - just like the "S" arms and direct drives (except in rare, recent cases (direct drive)-and it is done a bit different than in the Technics). The way the Technics is direct coupled to the motor causes noise, which was much higher than any rig I would ever recommend to someone. I have had and heard many Technics tables, modded and not, and, although when I got my first table back in the 70's, and thought it was great, as I listened to more and more tables, I realized that its limitiaions were just too great. The P3 is much, much more musical, quieter, wider and deeper soundstage and resolves low level details much better than the Technics. I'm trying to stick to that price point and know the P3 isn't the end all, either. My Dual CS5000, blew away the modded Technics (Dual is direct drive but had much lower platter noise). We compared a highly modded Technics to a Project table that cost a few hundred less last year, same cartridge/phonostage/system and it easilly beat the Technics. I absolutely loved my 1st Technics, and still do, but, sound wise, there is just much, much better for the price. It does hold a glamor place in hi fi history but, if you listen, it's just a pretty face with not much going on inside. Just my opinion, guys.

Cerrot, that's interesting because your experience with the Technics vs Project is completely opposite of mine. I found the light Project arm to be difficult to match with cartridges that offered strong value, the arm was difficult to properly adjust the VTA and anti-skate, and the turntable itself was extremely sensitive to vibration. With the same cartridge, the Technics sounds so much better to me, and gave me a much better signal-to-noise ratio. I also previously had a Music Hall table (similar in many ways to the Project), and it couldn't hold a candle to my Technics. Which mods did your "highly modded Technics" have that didn't do as well as the Rega?

The original poster asked about a Rega P3 and a Clearaudio Emotion (neither of which I've ever listened to). I'm sure both would work just fine, as they get good press. As for budget phono stages, it depends on how much you want to spend. On the inexpensive side, the Parasound zPhono is a good value for around $100, and the Acurus P10 and Musical Surroundings Phenomena are a little better for a couple hundred dollars more. The Dynavector P75 also gets good reviews.

Best of luck,

Michael

Agiaccio: I have a few questions for you:

You suggested a couple of rigs from Rega and Clearaudio in the $1500 range.
1) If your bro-in-law has only 50 albums and no intention of expanding that, why would he want to toss that much money just to play 50 albums?
2) What type of system does he have?
3) Is he open to the possibility of expanding his collection?
4) Does he have the space and inclination to provide a proper platform for the turntable?

If so, fine, but otherwise he'd probably do well with the Audio Technica PL-120 for $219.95 from LPGear. It's a well-executed solidly built (weighs about 26 lbs) Technics SL12x0 knockoff that plays 78s and has a built-in phono stage. For cartridge I'd go for an Ortofon 2M Red. Put Vibrapod #2s under the feet, or put the turntable on a butcher block cutting board and put Vibrapods under the cutting board to isolate the turntable and lower the noise floor.

For an outboard phono stage, the Cambridge 640P is pretty good and does both MM and MC, but I've found that for high output cartridges, the built-in phono stage of my Onkyo A-9555 integrated amp is significantly better. If he's in the market for electronics, this integrated would provide an excellent phono stage.