Yes, I have cracked three. Then I started removing the suction tube apparatus when I close the lid and store it away, and have not had another one crack.
Cracked record cleaning pick up tube
I have owned a VPI 16.5 recording cleaning machine for about 1 year. It has generally worked quite well, except for on two occasions, the pickup tube has cracked in the compression fit slot area.
My early speculation is that the issue may relate to the use of steam cleaning with simultaneous vacuum pickup. The pickup tube may thermally expand and subsequently crack within the compression fitting. I usually steam as one step in the cleaning process and I have been careful to minimize localized heating for fear of record warping. Thus, I am surprised if the tube would warm enough to crack.
Has anyone else had this mishap? Any alternative thoughts on the cause for the cracked pickup tube - they are not cheap!
My early speculation is that the issue may relate to the use of steam cleaning with simultaneous vacuum pickup. The pickup tube may thermally expand and subsequently crack within the compression fitting. I usually steam as one step in the cleaning process and I have been careful to minimize localized heating for fear of record warping. Thus, I am surprised if the tube would warm enough to crack.
Has anyone else had this mishap? Any alternative thoughts on the cause for the cracked pickup tube - they are not cheap!
- ...
- 6 posts total
- 6 posts total