2. analog
  3. 1245587672

Jelco Tone Arms 9 and 12 inch

I would love to find out how many if any are using this tone arm. Let me know the following:

1. Which length arm you are using?
2. What turntable you use the arm on?
3. What cartridge are you using with the most success?
4. Have you noticed any bearing or other problems?
5. What about their tone arm cables, which to buy?

I understand this company has made tone arms for a number of other high end turntable manufacturers with great success. If there are no major or other problems the Jelco tone arms look like a great buy.

I would very much appreciate any and all information and suggestions from forum members. The motor burned out of my old Cranfield Rock Turntable. The motor that lifts and lowers the Excalibur tone arm also malfunctioned. By the way my Excalibur arm is a very old model and not worth trying to save. I had thought about getting it rewired but decided after speaking with a rewire expert that it would be best to purchase a newer tone arm. So rather than try to get all of this repaired I am going to use the platter and bearing and build a new heavier plinth. I have already ordered a stand-a-lone motor for this project. I was thinking about using a 12 inch tone arm. A friend told me about the Jelco's which I had never heard of. They look interesting and they look like a quality product. I look forward to all your comments and suggestions.
rbwinterlink
Ag insider logo xs@2x
rauliruegas
13,100 posts
 
Dear Jeff: IMHO I think that you don't necessary lose the azymuth adjustment because you can find other headshells with azymuth adjustment.
Don't worry that a change in the resonance frequency of the tonearm/cartidge combination occur because the quality performance of a cartridge depend not only on that resonance frequency but in other critical factors like: the resonance behavior between the headshell/cartridge combination where even with the same headshell weight if you try that same cartridge with another headshell ( same weight ) that is build with a different material or in a different shape the cartridge performance change according that headshell modifications.

IMHO the relationship and overall behavior/performance between cartridge/tonearm is extremely more complex that only tonearm geometry, set-up or resonance frequency.

Regards and enjoy the music,
Raul.
mikeyc8
174 posts
 
these Jelco arms certainly look appealing. Does anyone know if they're easy to adjust, particularly the VTA?
utahusker
44 posts
 
VTA is very easy, you loosen the grub screw and slide it up or down.
rbwinterlink OP
72 posts
 
What are some of the lighter head shells you all are using? I would love to be able to use different compliance cartridges in this wonderful tonearm. What is the lightest head shell I can purchase and from where?

Tell me what do you find runs best in this tonearm? Do you find that the MM or MC cartridges play best with this arm? Thank you for your kind guidance all.

Bob
utahusker
44 posts
 
I used a LP Gear 7 gr headshell.
More to discover