Dynavector XV-1S impressions?


I have been a long time user of the audio note Io cartridge and recently purchased the Dynavector. I would be interested in others experience as I find this cartridge to be quite forward sounding i.e. the mid and high frequencies tend to be a bit brighter. It is very detailed and musical but the soundstage is not as deep as my Audionote.
Are my experiences similair to other users or is it my setup that is causing this impression.

Thanks
ecka
Thank you all for your responses thus far. My set up includes the Basis Debut signature turntable, the Sutherland Phd phonostage. My cartridge would only have about 15 hours of playback time so far so it sounds like I should be patient at this stage. BTW my loading is 47K and gain is 50db .
Any other comments are welcome.
Thanks

Zarir

P.S. Does my comment about soundstage depth also relate to inadequate break in?
Soundstage should also greatly improve with break in. I hear a very layered stage with my set up. Cartridge should transform after proper break in (50 hours minimum).
You may also want to try lowering your loading (around 500 ohms) and raising your gain a bit.

Dynavector Dealer
Ecka, I own both the XV1s and the Audio Note IO2v. Yes, your description of the sound is spot on. The Audio Note has a much deeper soundstage but not as wide as the XV1s. Comparing the AN and the XV, the XV is definitely a brighter and more detailed sounding cartridge. Both excel in different ways. The XV1s midrange and bass is no match to what the AN can do. Overall, the XV1s is a killer cartridge and so is the AN. Both sound different that's why I have them both hooked up for different presentation.

The XV1s needs 100 hrs to fully settle down but still, your description of both is still correct.
Dear Zarir: I agree with everyone about give more playing time, at least 50 hours. The XV-1 is more or less a " friendly " cartridge in its matching tonearm but certainly and IMHO is not friendly loaded at 47K, you can try it either at 100 or 200 Ohms that are your phono stage values and decide about. That forward sound that you are listening ( between other things ) comes from that very high load. After those 50 hours you need to check the VTA/VTF again.

You can try too the 60db gain position in your phono stage, unfortunately as you go for more gain your phono stage add several degradations to the cartridge signal, as a fact that phono stage performs way better at 45db.

I assume you are using the Basis Vector tonearm that it seems to me can work fine, maybe not the best match but a decent one.
In the other side and with this top cartridge quality level your phono stage can't accomplish or do real justice to that cartridge.

Regards and enjoy the music,
Raul.