2. analog
  3. 1250522555

Can You Live With Crackling & Popping Noise?

I just got my first turntable, a Rega P5 and not sure whether I'm supposed to be delighted or otherwise. When I put on my first record, there was intermittent popping, hissing and crackling noise at low to moderate volume levels. Having lived with digital for half of my life, I find this to be somewhat annoying. For a while I was feeling disappointed and pondering whether I would end up selling this thing. After a while I thought what the heck, since I had got this thing home I might as well turn up the volume and enjoy the music. I started to crank it up to reasonably high levels and all the hissing, crackling and popping noise began to drown and disappear into the background music. Somehow the annoyance turned to musical bliss, well almost.

My question, especially for those who own high-end turntables, can you live with all the crackling and popping noise? I reckon all these noises will be quite noticeable especially when playing some clean vocals with minimum background music? What actually cause all these noises? Is the noise caused by dust sticking on the surface of the record assuming the record is in good condition? Is there any way these crackling and popping noises can be reduced or eliminated completely by cleaning the records?

The manual states as follows:-

"Don't worry about visible dust on the record surface, this is brushed aside by the stylus and any that collects on the stylus can be easily blown away. In general, record cleaning is overdone and one should not believe all the claims made by record cleaner manufacturers."

Does this mean that cleaning records is pointless? If that is the case how do we get rid of the crackling noise in the event the dust and fine particles are the ones that are causing these noises? Is there any easy solution to clean the records by ourselves?

For any newbie who wants to take the turntable route, I would urge you to reconsider your options particularly if you have minimal tolerance towards popping and crackling noises. Even all my good old cassette collection that ended up in the rubbish bin years ago didn't exhibit all these popping and crackling noises.

If all these noises do not exist in records then analog is really the one to beat.

Thank you for your patience.
ryder
marakanetz's avatar
marakanetz
5,473 posts
 
Ryder,

Less-likely the megapriced cleaning machines will take care of clicks, pops and surface noise. Keeping records clean is their main purpose.

Sweeping dust with light touch of carbon fiber brush is sufficient enough.

I have now Michell Gyro SE/OL modded RB300/Lyra Helikon cart. I'm very concerned about quality of the records I buy and listen and keep them very clean and always place them in poly inner jacket. I also use Alesis ML9600 recorder to bring most of my records tended to llisten often to high-res CD24 formats and mostly play them through digital equipment. This way I preserve the records in good state.
Older records I have in my collection have clicks, surface noise and pops and I tried to eliminate it with Sony Sound Forge software. I admit I've done it right, but still keep 'unmastered' digital copy with pops because the edited version is still missing something the original has.
Noise is natural anywhere you are therefore absence of noise in digital sources is what makes them somewhat 'boring' vs. analogue
macdadtexas
1,794 posts
 
When I first play new records I don't clean them as most companies suggest. I just use my Audioquest brush to get the lint off of the surface. I am always shocked at how quiet the records are.

No pops, no crackle, no hum. After a few playing they will get dirty and I will clean them, and MOST of the time the pops go away, but sometimes there remains a bit of noise but very, very little.

Older records always sound better when cleaned, but you can't always tell the condition of a record by looking at it. Some look great, but if they have been cleaned it's really hard to tell the condition.

They could sound terrible.
jaybo
4,478 posts
 
an occasional snap crackle pop is one thing, but a defective or worn record is another. agree with tvad...your cartridge may also need proper alignment. the needle will also need a 'slight brush' for the alien particles it may pick up. record washing machines will only clean records, not change the original inherent condition.
mapman's avatar
mapman
21,951 posts
 
Once a record is clean, an inexpensive carbon fiber brush for removing loose dust is generally all that is needed to keep it clean.
Post removed 
More to discover