Allnic Verito Z:Owners and those familiar

How do you adjust the VTA with the Allnic?
If you look very exactly to the needle from the side and try to achieve a vertical position of the needle in the groove, i have the feeling to forced to rise the tonearm much more than with other cartridges and then the headshell and the downside of the cartridge is not parallel to the platter any more.
What are your experiences?

I don't own an Allnic cartridge, but the object of VTA adjustment is really to obtain the proper SRA (Stylus Rake Angle). If that requires raising the rear of the tonearm so that the tonearm is no longer parallel to the LP, I say do it anyway. There is nothing sacred about that.

Breezer:When did you receive your Verito?? I understand that a change was made on the last production run.These are being exchanged,as they have no lower mids,mid bass,bass.I sent mine back-it did have a wonderful top-end,but with the other elements missing I didn't keep it.
So to be honest,I haven't heard the real-deal.
What mine did was very good and if the "weight" had materialized,would have been a keeper.
I believe the cartridge body should be redesigned:a open ,hollow wood body is an invitation to resonances and doesn't protect the delicate inner workings.It may also do away with the need for a shim in metal headshells.YMMV.

When the "next generation " Verito Z arrives in users hands (arms),will someone be willing to comment???
I understand the "original" was happiest in high-mass arms (IE:the Walker at 30+ grams).Much like the Myabi.
Is the Shilabe,the current production Myabi??

I installed my current model Verito Z over the weekend. Nobody should listen to a new cartridge until it has run in a few sides unless they enjoy suffering, but I did anyway, and suffer I did with some unusual wooly sound.
However, after about four sides, the Verito did a rapid ugly duckling to Swan transition, and although far from break in sounds very nice. With just a handful of hours it is easily competitive with my Clearaudio Harmon Mg, albeit my Harmony Mg is past 1500 hours from its Soundsmith ruby retip.
I have the Verito mounted on a Grandezza 10 inch arm with brass headshell. The recommendation is for effective mass of 16 g and above, and the Grandezza probably comes in at about 14 or 15g, but does not seem to be any kind of mismatch. The VTA is very slightly tiled upward at the tail but is very close to parallel with the cartridge body.
I am running a full Allnic preamplification chain with the Allnic head amp, H 3000 phono amp and L 5000 DHT preamp. With the Verito, I would call the sound "full flesh and blood with peyote buttons" and no, it is not just rock and roll because there is tons of internal detailing. I am entranced by some of my "heavy rotation" albums like Ginger Baker's "Middle Passage" and Miles Davis "Agharta".
I heard a demo in a dealer system over the weekend with the Air Tight PC-1(not supreme) and an ASR battery powered phono. That sound was more "audiophile x-ray" with lots of precision and detail but not much guts by comparison, but it was on a different system. The ASR/Air Tight was more of the "Jazz at the Pawnshop clinking glasses" type thing.
I am eager to hear what the Verito is going to do as it relaxes and settles in, it does not seem like it will be painful anyway.