2. analog
  3. 1263789072

Which cartridge do you use with the vpi classic?

I just recieved the classic and it totally improved the sound of my analog setup. This is one of the best buys in audio, it only took me half an hour to setup, maybe an hour total from opening the box to playing, this is great for those who just want to listen to great vinyl without the fuss.
I am using a denon 103r with incredible results, the phono stage is a JLTI, an audio experience preamp and sim w-5 amp with merlin speakers, one would think this is a million dollar system.
I highly recommend the classic.
Now would like to improve in the cartridge department.
pedrillo
markpao
519 posts
 
VPI recommends (and sells) both Dynavector and Grado carts. I use a Benz Ruby 3 with my VPI set up (not a classic though) and it is quite a performer and tracks very well.
kmulkey
173 posts
 
I used a Dynavector 17D3 with a Sutherland Ph3D when I had my Scout and it was a GREAT match.
timztunz's avatar
timztunz
78 posts
 
With my Aries 3 and 10.5i arm I use a Dynavector XX2 mkII with a Sutherland Hubble phono stage and am extremely pleased with the result. I'm using a gain setting of 55db and a 100ohm load.
theseventh1's avatar
theseventh1
16 posts
 
I'm currently using a Benz ACE S HO through a Furutech AG-12 into the phono stage of a McIntosh MA6900. From my understanding most Benz carts mate well with VPI arms. I'm enjoying mine
stringreen's avatar
stringreen
6,468 posts
 
You guys have to remember that VPI now makes their arms with Stainless Steel instead of aluminum. This increases mass a bit. My experience is with the aluminum arms in which Benz's and Dyna's where/are excellent matches but with a bit of damping. Those of you with the Stainless arms will probably require no damping. Shelters and Denons will benefit from the extra mass as well.
More to discover