Reel to Reel decks

BTW, I think I saw that United Home Audio is participating at the Capital Audio Fest near DC this weekend. UAH where I heard some of the new RTR master recordings eclipse vinyl and CD last year on a very fine mbl system. I suspect that some of this technology will be on display there for those interested in hearing.

Actually here is what is advertised:

"Special events in the UHA room at the Capital Audiofest:

" UHA will be playing a precious few 0 generation Master Tapes recorded directly to 1/4" tape at 15ips, these tapes are not copies,
these are the original 0 generation tapes. We have both jazz and classical, you won't want to miss this demo.

3.) We will be playing "The Tape Project" 1.5 generation Master Tapes.

4.) We will be playing tapes we recorded using the Phase6 reel to reel tape deck from a $100,000 vinyl system, incredible reproductions."

I recently picked up a near-mint TASCAM 42B, (2-Track, 15ips) from a local church having been inspired by the CES reports of "Best Sound at the Show" at the Tape Project room as well as the amazing j-corder and the United Audio sites. I made a 15ips recording on NOS 3M/996 tape of direct-to-disk vinyl; Basis/Graham/Benz front-end through EAR 834P pre-preamp output directly into the deck. Listening through Sennheiser HD-600 headphones from the deck jack to the playback was amazing. Actually heard things I'd never heard before. I now intend to tape all my best vinyl. Tape quality is crucial. You can buy used 10.5 inch reel tape, but there's no guarantee it's been stored properly even though it may appear fine. You'll need to "bake" the tape (unless it's an old pre-recorded acetate). NOS and new tape is available but is expensive. TEAC/TASCAM Service Support has been great and is a crucial consideration in getting into this.

Here's another view of "the copy sounding better than the original." And I still can't believe it, no matter how many I do. I currently have two Otari machines at hand (one belongs to a friend) along with a Teac A2300SD (Dolby). I've been dubbing my own 4-track commercial tapes (mostly 7 1/2 but a few 3 3/4) onto one of the Otaris at 2-track 7 1/2 and 15 ips. In every case, the dubs are audibly better than the originals.

I'm not sure how far I'm going to take this -- and the excellence of the tape stock used for dubbing does make a major difference -- but the results so far have led to more and more dubs. Outstanding cases in point are the Miles Davis "Kind of Blue" and "Sketches of Spain." Has anyone else tried this?

a copy cannot be better than the original in a technical sense. It is just not possible.

That does not mean a copy cannot sound subjectively better however. That is more a function of what one likes to hear.

Copying often has a filtering effect on teh original meaning that some aspects of the signal are altered relative to otehrs which changes the sound.

The bad thing is that information lost in copying cannot be replaced should your preferences change in the future.

Better perhaps to find other ways of tweaking to achieve the desired results that can be reversed or eliminated dynamically if desired? Different ICs, tone controls, speaker toe-in, etc. are all examples of reversible tweaks that might have similar effect without risk of permanent loss or damage to the source.

I suppose you could keep multiple copies of recordings around but there is still a lot of time and expense involved in dubbing recordings to achieve sound improvements versus other options perhaps?

Here's what I think is happening in my case with the "copy" sounding better, through headphones at least. My TASCAM deck at 15ips is flat to 23Khz and with 3m/996 tape, has a 9db Headroom. Cutting out the room, the speakers, the speaker cables, the Cary monoblocks, the Transparent interconnects and the EDGE preamp, reduces a lot of aberrations done to the "original" down the chain and compression of headroom. A drum thwack I've heard a hundred times literally made me jump and, go ahead and laugh, I just love watching those huge, pro-grade VU meters on the 42B slam to the pin with no distortion with 996 tape.