Nude Turntable Project

Jelco arms resemble vintage equipment. The SA-750 comes in a 12" version that would overcome the spindle-to-pivot issue. I'm currently playing with a SA-750D (9" version) that sounds pretty good with a Lyra Clavis Da Capo.

Halcro, a review of Raul's system should suggest a few good vintage arms. I bought a Technics EPA-100 on his advice - a very versatile arm. He also likes specific Fidelity Research, Micro Seiki, Audiocraft, Audio Technica and Lustre arms, but that is of little help without specific model numbers so check out his system.

Are the Jelco arms made by the same company who built the Audioquest and Sumiko Premier arms? I had a Premier FT-3 and while I would not say it was outstanding I did consider it to be very good - quality construction and finish, good bearings, adaptable to a wide range of cartridges, and reasonably priced, particularly now on the used market.

Yes, Jelco made the AQ and Sumiko arms. I have an FT-3 and it was pretty good once I applied the arm wrap from the Sumiko Analog Survival Kit. Works quite well with an AT-OC9ML.

I've just received the raw bronze castings for the arm-pods (see link).
I designed the pods to suit all the arms I'm familiar with so that the inside diameter hole is 55mm diameter which can take the thick VTA tower of the Continuum Copperhead arm whilst the cable entry/exit slot in the curved rear of the pod, allows for the Phantom II sideways connection din plug as it moves up and down on its VTA travels.

The pods are now off to the automotive paint shop for its 'piano black' polyurethane finish and the drilling and tapping of the spiked adjustable feet and the aluminium top plate.
Hopefully I will have the completed pods back in a week?

I also bought off EBay, the 'famous' Fidelity Research FR 64S tonearm (thanks Tuchan) with silver wiring and stainless steel armtube.
I will be able to hear for myself whether the hype about this arm is correct or if Raul and Ralph (Atmasphere) are correct in their assessments?
LATEST

Halcro,
Cool. How would those pods be finished? An aluminum top plate would take care of the topside, but how about the sides? Also, how do you deal with arms which have a much smaller diameter mount?