Does EAR324 phono stage sound like tubes ?

Tim de Paravicini don't recommend us to use 6DJ8/6922 in PCC88/7DJ8 positions or vice versa. For details, please see another post "Interview with Tim de Paravicini at High End Audio Show"

I had tried to put E88CC in my EAR 88PB after the interview. The higher voltage lighted up the tubes with abnormal brightness and sounded strange. I had also tried to put PCC88 in 6922 positions and the sound was just twisted. I wouldn't dare to keep it that way for too long.

Dan

Is anyone here using a external step up on the 324 on the mm mode ?
Lundahl, altec , hashimoto and Bob's Cinemag are what comes to my mind. Any experience with any of these on the 324 ?
Would it be too much gain if the cart had an output of .4mv to .6mv along w/ an external step up ?

Dan: I'm not sure I follow you when you refer the higher voltage of the E88CC. That tube has less voltage than the PCC88(7 volts). You also say you tried the PCC88 in 6922 positions. Are you referring to 6922 positions in the EAR 88pb? Do you mean there are clearly designated separate 6922 positions as distinguished from 7DJ8/PC88 positions in the 88pb? I've neither seen nor heard anything that mentions this. All four tube sockets in the 88pb can be used with either 7DJ8/PCC88 tubes OR E88CC/6922/6DJ8 tubes. I've not had nor have I noticed any problems either way. I've also read that Tim Paravicini has indeed used 6922s in the 88pb. Personally, I prefer the 7DJ8s.

Opus88, I was referring to the higher voltage of all four PCC88/7DJ8 positions in EAR 88PB lighted up the 6922s with abnormal brightness and it sounded a bit strange(comparing to stock PCC88). I truly believe E88CC/6922s will shorten their lives in PCC88 positions as ascertained by Tim. Exotic NOS E88CCs generally cost much more than same brand of PCC88...it's simply not worth the try for prolonged use!!!

Please see another upcoming post here in A'gon "Interview with Tim de Paravicini" last year in which I talked to Tim face to face. Check the photo of my virtual system when I asked him whether we should use 6922 in PCC88/7DJ8 positions...his answer with his gesture!!!

I have never heard Tim uses 6922/6DJ8s in his top of the line products(912, 88PB, etc)which are only designed for PCC88/7DJ8, what is the source of your knowing? Please also read the above interview and let's clarify the issue.

VBR
Dan

What phono stages have you guys compared the EAR88pb with ?