Does EAR324 phono stage sound like tubes ?

Opus88, I was referring to the higher voltage of all four PCC88/7DJ8 positions in EAR 88PB lighted up the 6922s with abnormal brightness and it sounded a bit strange(comparing to stock PCC88). I truly believe E88CC/6922s will shorten their lives in PCC88 positions as ascertained by Tim. Exotic NOS E88CCs generally cost much more than same brand of PCC88...it's simply not worth the try for prolonged use!!!

Please see another upcoming post here in A'gon "Interview with Tim de Paravicini" last year in which I talked to Tim face to face. Check the photo of my virtual system when I asked him whether we should use 6922 in PCC88/7DJ8 positions...his answer with his gesture!!!

I have never heard Tim uses 6922/6DJ8s in his top of the line products(912, 88PB, etc)which are only designed for PCC88/7DJ8, what is the source of your knowing? Please also read the above interview and let's clarify the issue.

VBR
Dan

What phono stages have you guys compared the EAR88pb with ?

Okay Dan, thanks very much for clarifying, and your comment on shortened life for E88CC/6922s in the 7DJ8 sockets makes sense. Based on listening, I also determined in short order that I didn't much care for the sound of 6922/6DJ8/E88CC tubes compared with the 7DJ8s...Mention of Tim's using 6922s in the 88pb is found in an Audiogon thread by Tompoodie titled "6922 6DJ8 or 12ax7 tubes better for preamp?" dated 05/31/10. He indicates this in his opening statements. Of course, there could be a question regarding its veracity, so you might want to e-mail him on this...After you first commented on the "Interview with Tim..." prior to my remarks, I seached for that article but could not find it. You just indicated however that it will be available in an upcoming post. Will this appear in this analog forum as well? Thanks for the info.

Nolitan: In response to your question about other phono stages in comparison with the EAR 88pb, check out my experiences in the Amps Preamps forum thread titled "EAR Preamp" by Gabeharty, dated 03/27/08. I should add that I preferred and stayed with the sound of my trusty VPI HW19 Mk.3 'table with SME IV.Vi tonearm and specially made brass/aluminum armboard. Cartridge is the Dynavector XV-1S. My current cables of choice are the Purist Proteus Provectus tonearm cable(the most recent revised incarnation that preceded the current Praesto version), the Silkworm+ interconnect with copper Eichmann bullet plugs and the JPS Superconductor 3 speaker cable. I still use and enjoy the Wegrzyn Copper Slam power cord for my 88pb. My Air Tight ATM-3 monoblock amps have long been wired with the original Synergistic Research Master Coupler power cords.

Opus88: you may search threads under my account(Danwkw). But I found the post has been edited by someone...I gonna post another one in AA under the topic of tubes.

Dan