MC loading at 47K


Hi All,

Just after some expert advice from your good selves if I may. My current system is as follows:

Musical Fidelity KW550 intergrated amp which has a MM and MC section, both loaded at 47K. The only difference between them is the step up voltage.

My turntable is the Rega P9 with Ortofon Kontrapunkt A.

Looking at changing my cartridge but honestly cant decide between MM or MC.

My music taste are as follows:

Reggae
Soul
Female Vocal
RNB

No classical or jazz.

So what should I choose based I'm only limited to a 47K loading. I was thinking either of the below:

1. Ortofon Jubilee (MC)
2. Ortofon 2M black (MM)
3. Clear Audio Maestro (MM)

Is there a down side to loading up a MC so much?

Thoughts please...thanks
che13
Musical Fidelity manual. Specs at end. link[http://www.musicalfidelity.com/downloads/archived-manuals/English/kw550_manual_eng.pdf]
Hifihvn,
It has 47K for both MC and MM. Not too many low output MC carts will benefit from being loaded @47k. I would connect a resistor in-parallel when switching to MC. It could be done in any phono unit.
I put the link there for Lindisfarne, and others to see what the OP has to work with.
Some folks including Charles Hansen (Ayre) and the late Allen Wright recommended running all MCs at 47kOhms. I think Harry Pearson (HP) of The Absolute Sound recommended it too (don't know if he still does). I tried it and liked it with a Denon DL-103 although I'm currently running that one at 500 Ohms. I'm not sure but I believe the "thinness" will have to do more with the phonostage than anything else. If Musical Fidelity loads both MMs and MCs at 47K, they must think MCs sound okay that way.
Post removed