Dynavector 20X or Grado Sonata for VPI?

I am glad that I am not the only one that was not impressed with the Grado. I was a Grado dealer for awhile and have tried every Grado wood body cartridge expect for the Reference "Reference". I just could never warm up to any of them. They were all "blah" sounding. No life or energy.

I know that Grado recommends at least 50 to 100 hours to break them in, but I couldn't ever make it that far. The dullness just wore on me.

The DV20X is a very nice, dynamic cartridge. One of my favorites for the price.

Many thanks for your input folks. Given the preference for the Dynavector, I wondered about the version - VPI recommends the custom mid-output version but I am not sure how well that mates with a SS phonostage (too strong for the MC input, too weak for the MM input?) - is the low output version a better choice?

I have found the less you ask of your pre, the better they sound. I would do a Dyna or Benz med. output cartridge and ue the MM input. You might have to turn up the volume control, but that's of no consequence.

You are comparing apples and oranges. Grado is for vocal jazz soul while the Dynavector 20X is for Rock and other explosive music. Nothing is more music sensitive than the cartridge. The turntable matches just fine, but if there is a mismatch in your favorite music, then you should get another cartridge without hesitation.

Just curious, why do you consider only two cartridges?
And as Orpheus10 said, you usually have to choose very much depending on what kind of music you mostly listen to.
For example, I too am thinking about new cartridge for my Spacedeck/Spacearm. Don't care much about Dyna 10x5 even for jazz/rock let alone vocals. 20X should be better but still essentially more of the same. It appears that unless you stay with MM you have to go over $1k to get a very well balanced MC, very possibly close to $2k.
Some people put MM on quite expensive tables/arms and I will probably do the same until(if) I am prepared to spend those $2k on cartridge.