Leave the turntable running?

Instead of Dan_ed's 'I do it all the time' I deed this all
the time with my (then) Lp-12. After some practice it is 'a piece of cake'. The reason: all those small motors need some help.

Regards,

I run Michell Gyro SE on while listening and swapping records. I do not leave it running for long time unplayed or overnight.

I thought everyone popped the record off to switch albums or sides. I turn it on when I start to play it and I turn it off when I shut the system down.

08-15-11: Stanwal
This sounds totally unnecessary to me and this is the first time I have ever heard of the idea.

Same here, on both counts. And it seems to me that during the process of lifting the record there could be an instant of time when part of the circumference of the hole of the stationary record would press against the rotating spindle, momentarily increasing the strain on the motor. And I would be concerned, also, that having a rotating platter momentarily sliding against a stationary record would not do the record surface any good.

In my case, btw, I use a record clamp, so I have no choice in the matter.

Regards,
-- Al

On and off to play and flip, no need to worry about the motor being turned on/off, risk damaging the record or fumbling with the clamp while the platter is turning; well designed motors don't need to be worried about in this regard. I really do think we overdo it a bit with our fear of equipment failure/wear-avoidance issues here folks.